A Simple Guide To Hardwood Floor Refinishing
A hardwood floor requires refinishing to keep it in good condition for years. Depending upon the type of wood material, your wood floor refinishers will give you the right estimate for the entire project.
Apart from the cost factor, there are various tips to be followed to get refinishes done in the right way. So here’s the best guide to hardwood floor refinishing.
Prepare The Floors
When you hire a refinisher, they will examine the floor before anything and then prepare it. This includes moving the furniture, pulling up the carpets of the area rug (if any), and cleaning the entire floor.
After this, they will hammer down the protruding nails, check for any cracks and debits before vacuum cleaning the area.
At this stage, the refinisher will test the floor condition. This can be done with the help of splashing water droplets on the floor. If the wood soaks them immediately, it indicates that the floor needs refinishing. To get your wooden floor evaluated, search online with hardwood flooring refinishers near me.
Sanding Comes Next
Sanding is an essential step while refinishing. It removes all the scratches and existing stains the floor has. A professional floor expert will use varieties of sanders to do the sanding. Mostly coarse sandpaper is used at the beginning. As the sanding progresses, medium-grit sandpaper or lower grit sandpaper is used.
After this stage, the refinisher will sweep the floor and remove all the dust and debris accumulated.
Smoothen The Edges
The edges of the floor should be taken into account. Every small corner and every tiny edge should be properly checked. An edger is used to treat difficult areas such as closet floors and stairs.
Call your floor refinisher or search for hardwood flooring refinishers near me to keep your hardwood floor new-like.
Use of Floor Buffer
This process helps to level down certain unevenness and imperfections. It makes the floor smooth and takes away any signs of scratches. But only a professional will know how to use the buffer in the right way.
Stain It Nicely
To give your wooden floor a new look, ask the refinisher to apply a fresh coat of stain. You can choose the stain as per your taste and room decor. Stains will not only make your house look beautiful, but also protect the wooden floor.
The refinisher will work a small portion of the floor and will progress gradually. After the initial application of the stain, the excess should be removed. During staining, homeowners should stay away from the house for a few days or as long as the stain takes to dry.
Hardwood flooring refinishing is a technique that needs proper attention and professionalism. So make sure you hire an expert.
Blackhawk Floors, Inc. is a hardwood flooring company providing installation, cleaning, inspection, repair, refinishing ( www.blackhawkfloors.com/Hardwood-Flooring-Refinishers-near-Me ), and recoating services in Phoenix, Scottsdale, Flagstaff, Tucson, Goodyear, Prescott, Paradise Valley, Payson, and Chandler, Arizona. To know more, visit https://blackhawkfloors.com/about/.