Restore Wi-Fi set-up in windows 10 after replacing your router?
This document explains how to set up your Configure Wireless HP Printer After Changing Router or ISP. You'll need to reset your HP printer to factory settings, but keep in mind that this will wipe out all of your printer's current configuration data.
Follow all directions from your ISP as well as the HP website. If it still doesn't function after that, there may be a problem with your printer, which you should have your network servicemen look at. I hope this information aids you in resolving any issues you may have had with wireless printers.
You may need to update your printer's wireless settings as well as the settings on your printer as a result of a change in your wireless or internet provider. After changing your router or internet service provider, follow the instructions below to configure your Configure Wireless HP Printer After Changing Router.
Setting up a wireless network
The network name (SSID) and wireless password you use for your home network must be set on all devices that connect to your network through wireless. See Wireless Basics for further information. All wireless devices you want to use on your Configure Wireless HP Printer After Changing Router with the new settings whenever you alter your wireless settings for any reason, such as replacing your wireless router or receiving a new router from your ISP.
All of your wireless network devices, including your wireless printer, should instantly connect to the new network router if you update your home network with a new Configure Wireless HP Printer After Changing Router with the same wireless settings as the original router.
Note: If your wireless printer (or any other network device, including your computer) has a static IP address, you may need to update it to match the IP address format compatible with your new router. The default IP address of the router may be found in the router manual (also sometimes called a " gateway address "). If you don't specify a static IP address, the router will assign a new IP address to the printer (and other network devices). Learn more about how to set a static IP address.
Changing the wifi configuration
If you modify the wireless network settings for your wireless home network, you must also adjust the settings for your wireless printer. On a printer with a Wifi Setup Wizard, specify the new wireless settings as follows: Open the Wireless Settings option from the printer's control panel. By pushing the Wireless Button or touching the Wireless symbol on the printer's control panel, many models allow access to the Wireless Settings. If you don't know how to go to the Wireless Settings menu, consult the printer's help manual.
Select "Wireless Setup Wizard" from the Wireless Settings menu. The Wireless Setup Wizard will walk you through setting up your printer with the updated wireless settings. Select your network name from the list of available wireless networks in your region on the printer's display, then input the wireless password (WEP/WPA/WPA2) when required.
To check that the printer was successfully connected to your network, print a Configure Wireless HP Printer After Changing Router Network Test report from the Wireless settings menu.
If your printer doesn't have a Wifi Setup Wizard, use these steps to establish your wireless settings.
To begin, double-check that your computer is linked to your network. You'll also need a USB cable, which will be used only momentarily during the setup. Do not connect the USB cord between the computer and the printer until the program instructs you to do so. If you already have HP printer software installed on your PC.
Windows XP, Windows Vista, or Windows 7:
Use Start -> Programs -> HP -> your printer model -> Printer Setup & Software on Windows XP, Windows Vista, or Windows 7.
Start the Printer Software from the Start screen (the icon for the printer model name) or the tile for your printer.
On the top of the Printer Software screen, click or touch Utilities.
Choose your printer's setup and software.
Mac OS X:
Open Finder and navigate to Applications -> HP -> your printer model -> Printer Setup & Software on Mac OS X.
From Printer Setup & Software or the Welcome Back screen on the CD, choose "Reconfigure Wireless Settings."
Follow the directions on the software screens carefully. Do not use your USB cord to connect the printer to your computer until the program instructs you to. You'll be told to remove the USB cord at the end of the procedure.
Restart any computers that will utilize the printer via the Configure Wireless HP Printer After Changing Router once you've successfully set up the printer with the updated wireless settings.
Note: If you have a DSL or cable modem connected to your wireless router and are unable to connect to the Internet, disconnect the power chord from the modem, wait 30 seconds, then reconnect the power cord. Contact your Internet Service Provider if this does not work ( ISP ).
https://goerrors.com/printers/configure-wireless-hp-printer-after-changing-router/