Overview of Skills that Instruments Calibration Engineers Required

What is Calibration?

Calibration is the procedure by which instrumentation, devices, meters and other testing equipment are set up, check and maintained to confirm they remain to give correct, precise and reliable results. A vast range of equipment with manufacturing instruments, devices and instruments can need calibration. In scientific research or manufacturing environments, this gear will be used to monitor things such as temperature, humidity, pressure, light intensity, etc. The precise equipment to be maintained will vary between roles, depending on the specific place of work and what is being manufactured.

The work of a calibration engineer is dynamic to successful scientific research and manufacturing. Without specific calibration, the accuracy and precision of readings, actions, and output of gear cannot be assured. In extremely regulated industries such as pharmaceutical or medical device manufacturing, it is important. There are strict protocols to be followed and specific documentation to be accomplished to prove that calibration activities are carried out properly. Calibration Engineers are regularly required throughout the manufacturing cycle and, as a result, shift work is commonly required.

What does an Instruments Calibration Engineer do?

A Calibration Engineer will regularly test gear and instruments to check that their readings and output meet probable results. If a deviation is found, that piece of equipment will be further analyzed, adjusted or repaired as essential. The precise tasks carried out will vary dependent on the specific role but, activities can contain:

• Installation of new or repaired equipment.
• Routine testing, calibration, and monitoring of gear.
• Examination and interpretation of testing result data.
• Troubleshooting when results fall out-with the probable ranges.
• Repair of equipment as essential.
• Ordering of parts.
• Compiling reports for facility management.

Which skills are needed?

The skills essential to be a successful Calibration Engineer contain:

Metrology: This is the science of measurement. Have a deep understanding of this subject and the difference between accuracy, and repeatability.

Manual Dexterity: Professionals in the area must have brilliant hand-eye coordination and be able to perform potentially tricky actions fast and properly.

Communication: Both written and verbal communication skills are essential. May be essential to report outcomes of tests to engineering department staff, regularly liaise with colleagues to schedule testing and repair, compile reports for management and deal straight with suppliers for replacement equipment.

Attention to detail: Precision is important in this role; the smallest details have to be noted and acted upon when required. Must also follow the SOPs for testing and calibration of equipment in a very strict manner.

Coordination: Working with a range of manufacturing equipment, conducting tests in strict obedience to SOPs and rules.

Analytical skills: Must be able to take raw test data and analyze it precisely, reaching sound conclusions. Must also be able to critically analyze problems and come up with innovative solutions when essential.

Team working: Must work closely with colleagues to describe testing routines, protocols, and schedules.

IT skills: Data entry and database use is a significant part of the job and must be done in accordance with any internal SOPs and external regulatory protocols.

Instruments Calibration Engineer to accomplish all requirements of conducting in-house calibration and maintenance of Instruments as well as deliver the best knowledge to calibrate the instrument. The responsibility of the instrument Engineer is to follow the proper calibration processes to accurately calibrate the instrument. The instruments calibration engineer training will deliver knowledge of preparing calibration certificates and work sheets for types of equipment, Metrological, Mechanical, thermal & electro technical, etc.