How to Install Car Paint Protection Film

Whether you have bought a new stunning auto or have recently painted your old auto, the first and foremost thing is - protect the paint from the weather or other external elements. One of the greatest ways to achieve this is by installing an auto paint protection film (PPF). A PPF can be a highly gloss and invisible film which can actually protect the paint from getting scratched, damaged and chipped from sand and bug debris. Although they can be installed on any part of an auto however, car owners prefer to install them on those parts which are more prone to get damaged.

Since it is directly related to your car appearance thus, you should not take it lightly instead, prefer to call a professional who can get the job done in the best possible way. However, if you can follow the basic rules and know what to do or how to do then you can take it as a do-it-yourself task. Moreover, you can go with either protective film rolls or protective film kits.

Following are the given steps that explain how to install PPFs on a car parts.

• First of all, choose a clean and dust free area as you cannot get the job done in an area which is not spotless.
• Collect all your necessary equipments and that include knife, application solution, squeegee, film rolls or kits.
• Now begin your work by measuring and cutting the films. This can be a difficult step therefore; do not give a try if you are not sure about it. Instead, better to go with custom design kits which come in pre-cut forms and can be installed with an ease.
• After that, wash and clean your car properly as dust and dirt can completely ruin the appearance of the car.
• Apply application solution carefully to wet the targeted area. After that, gently remove the back cover from the film and place it on the targeted area. However, make sure you do not put any pressure on the film. After placing the film, use squeegee to let the water and air bubbles out.
• Once the PPF is placed properly on the desired auto part and air bubbles and water have completely squeezed out, use knife to cut off the extra film.

In addition to all these, prefer to start in the center and go outward for better results. Thus, car paint protection film installation is not a tedious task if you carefully follow the above mentioned steps. So, after you successfully installed the PPFs on the auto parts you are then ready to enjoy the driving to the fullest.