FailZero M16 Bolt and Carrier Group

When it comes to the FailZero M16 Bolt and Carrier Group, the UCT coating is an applicator of patent process of  EXO Nickel Boron Coating and FailZero is the application used to process such products. FailZero has the mil spec bolt carrier with the kit that includes the EXO coated hammers. If you want, you can buy FailZero M16/4 Basic Full Auto Kit since M16 has additional mass that increases the variety of the loads for long period during the cleanings. Buying M16 is the carrier for someone who needs an M16 for the full auto capability. If this is not the case, then the bolts will work just like other bolts. The kit has a hammer that has been EXO coated.

The bolt and the carrier on an AR should be reliable since they need to perform at an optimum level. Chrome coated bolts are easier to clean which improve the reliability. FailZero M16 Bolt and Carrier Group is what people are looking for when it comes to finding the bolts that have improved reliability. As chrome coating, EXO also provides corrosion and rust but at a high degree. The EXO coating on the bolt and carrier are used in different ways.  EXO coating is 40 percent harder compared to chrome coating, it bonds well with the metal molecular level and it doesn’t rub off the chips or builds up.

FailZero M16 Bolt and Carrier Group is also used on the non-line sight of surface which means on the crevices, nooks and holes. The biggest part of all is to know that the EXO coating can eliminate any need to use lubrications.

With this type of coating, there is a need to emphasize on the final finish before the coating can be used.  With FailZero M16 Bolt and Carrier Group pre-finish is of more importance. FailZero offers an important amount of time on polishing before this application can be used since it converts the Carpenter 158 Bolt or 8620 steel carrier in FailZero Bolt carrier Group. This is the most stunning carrier and bolt that you may never have seen.

The FailZero M16 Bolt and Carrier Group method can also be used on the jewelry since it makes them look cool, quieter and easily cleaned. The hammer found in the kit is also important when it comes to the EXO coating which makes it easier to clean.

The best part about FailZero M16 Bolt and Carrier Group is that it makes everything slick which eliminates any need for lubrications. The possibility of running without lubrication is important in dirty and sandy environment since the small particles may attach to the lubrications.

Using of FailZero M16 Bolt and Carrier Group is not something which has not been proven and it is not meant to make the carrier or the bolts a pretty face. It is important when the carrier or bolts are meant to be used in extreme environment. This is the right thing to do in case you want a carrier that can outperform others.

Find more information relating to M16 Bolt and Carrier Group, and WMD Guns Bolt and Carrier Group here.