The 8 Predominant Plumbing Woes and Their Remedies

Author: Douglass Samuel

Considering the fact that there are so many and such routine activities that take place within a home, the issue of plumbing complications is one that is very likely to surface at the least expected times. Enabling you to prepare for these interferences, this article provides you with a list of common plumbing issues and their solutions. If you are to get these problems early, it will help you cut the time to solve them solving them and using less cash and effort, not to mention reducing unneeded distress.

1. Persistent Dripping Faucets

Perhaps one of the commonest inconveniences known to affect plumbing, leakages from taps are known to waste a lot of water when not well attended to. It always starts with a faulty washer or O-ring, which, at any rate, can be quite easily swapped out for a new one.

Solution:

Shut off the water supply to the faucet.

Disassemble the faucet to access the washer or O-ring.

Replace the defective component and reassemble the faucet.

Restore the water supply and test for any remaining leaks.

2. Obstructed Drains

Slow draining water, production of bad smells and reversal of water flow are some of the symptoms that go hand in hand with blocked drains. This state of affairs is normally caused by the collection of hair, soap scum, grease and many other things.

Solution:

Employ a plunger to attempt to dislodge the obstruction.

For more resilient clogs, resort to a drain snake or chemical drain cleaner.

Prevent future blockages by installing drain covers and routinely cleaning the drains.

3. Perpetually Running Toilets

Overflowing toilets continues to run all through, which means you are using so much water while flushing, thus the high bills you have to pay. This problem is mostly as a result of a defective flapper valve or the fill valve.

Solution:

Inspect the flapper valve to ensure it creates a proper seal. Replace it if damaged.

Examine the fill valve and adjust the float arm to ensure the tank fills to the correct level.

Test the toilet to confirm it no longer runs continuously.

4. Insufficient Water Pressure

Defective water pressure can be witnessed most of the time as may be due to procedure built on the water line, wrong pressure lowering valve or leakage check in the water pipe line.

Solution:

The mineral deposits in the aerators and the showerheads should be scraped off.

If it does, and if no sign of external perpetrators is found, check for leaks in the plumbing system.

It is advisable to involve a plumber to assess and repair the regulator pressure if necessary.

5. Water Heater Complications

Problems with water heaters can mean no hot water at all, drip or odd sounds from the heater. These issues are usually caused by stale deposits, faulting thermostat or defective heating component.

Solution:

Flush the water heater to eliminate sediment accumulation.

Assess and if it’s necessary replace thermostat or heating element if challenged with a problem.

If one or all of the components have worn out especially the water heater is leaking then it requires replacement.

6. Ruptured Pipes

Broken pipes are among severe plumbing problems, and in case left unaddressed, they might bring significant harm to the house. It is commonly caused by low temperatures, rusting or water hammering.

Solution:

Immediately shut off the main water supply to prevent further damage.

Contact a professional plumber to repair or replace the damaged pipe.

Insulate pipes in colder regions to forestall future freezing.

7. Sewer System Malfunction

Well, one of the scariest plumbing problems that will ever cross your mind is a faulty sewer system; just try to imagine what happens when the sewerage system is clogged and the sewage water starts to flow backwards into your house. This occurrence is mostly as a result of trees increasing in size, existing pipes bursting or a sewerage system being blocked.

Solution:

Refrain from using any plumbing fixtures until the issue is resolved.

Engage a professional plumber to inspect and clear the sewer line.

Regularly maintain your sewer system to avert future malfunctions.

8. Sump Pump Breakdown

Actually, sump pump is useful for preventing basement from flooding, but, sump pump can also breakdown; due electricity jamming, wrong installation or discharge pipe is blocked.

Solution:

Ensure the sump pump is connected to a functional power source.

Inspect the discharge pipe for any obstructions.

Test the sump pump regularly to verify it’s operating correctly.

Consider installing a backup power source to guard against failure during a power outage.

Conclusion

This knowledge of these frequent plumbing dilemmas can help guard the plumbing system of your home and avoid the expenses of getting it fixed. The two are critical in the enhancement of prevention of these problems from getting worse if not well maintained and addressed at the earliest possible time. Incase you are ever in doubt about a specific issue that bothers plumbing or the solution to such issue, then should contact a professional plumber.