Know about the anti evaporation admixtures for concrete in uae

Author: Mapei Dubai

From Mapei we have an excellent product which is used as anti-evaporation agent in UAE called, MAPECURE E30. Let's discuss more about its details

MAPECURE E30

An anti-evaporation agent in UAE in the water emulsion prevents concrete from drying out too quickly when exposed to winds and sunlight.

TECHNICAL DATA:

Application: spray

Consumption:

  • neat: 70-100 g/m2
  • diluted: 1:1 with water: 140-200 g/m2

Packaging: 25 kg tanks

WHERE TO USE

To protect fresh concrete from rapid water evaporation caused by wind or sunlight and to reduce surface cracking.

Some application examples

Mapecure E 30 is especially recommended for protecting concrete structures such as:

  • industrial floors;
  • exterior paving (road, parking lots);
  • airport runways;
  • renders;
  • dam faces;
  • bridges;
  • canals;
  • reservoirs.

TECHNICAL CHARACTERISTICS

Mapecure E-30 is a white water emulsion made of unique resins that covers concrete in an even, somewhat elastic layer that is air- and water-tight. Whether concrete is exposed to direct sunshine or severe rapid drying conditions brought on by wind, low humidity, high temperatures, or both, Mapecure E 30 offers dependable protection against water evaporation.

The following benefits are provided by Mapecure E 30:

  • Improved mechanical strength development: the lack of moisture in curing concrete can lead to a 50% reduction in strength;
  • improved resistance to wear;
  • reduced surface dusting;
  • quick and simple application.

For industrial paving, Mapecure E 30 must be applied after the concrete has begun to set, and for formed concrete, it must be applied right away following formwork removal. Mapecure E 30 should be put to the surface of the concrete following the evaporation of bleeding water.

Getting the product ready

Mix Mapecure E 30 thoroughly before using.

Use of Mapecure E 30 requires no dilution at all.

Utilising the product

Spray Mapecure E 30 in a single, thin, even coating at about one atmosphere of pressure.

Rain and washing won't affect Mapecure E 30 after about two to three hours at +20°C.

Tidying up

Prior to Mapecure E 30 drying, spray tools need to be cleansed with water.

CONSUMPTION

Mapecure E 30 not diluted: 100-250 g/m².

PACKAGING

Mapecure E 30 is supplied in 25 kg tanks, 200 l drums, and 1000 liter IBC.

STORAGE

Mapecure E 30 may be stored for 12 months in closed containers; protected from frost and from exposure to direct sunlight. The storage temperature must be between +5°C and +30°C.