How to Prepare Your Building for a Fire Escape Inspection

Author: Fire Escape Painting Nyc

Fire escapes are an important aspect of building management, particularly when it comes to cities as dense as New York. Pre-empting a codal deficiency, one pertinent requirement is conducting a Fire Escape Inspection NYC. Regardless of whether you are the owner or lessee of a building, such inspection will run usefully and one can prevent penalties and assure safety of all persons in the building if there is indeed such preparation for the exam. The goal of a Inspection NYC is not only to protect against fines but is also a measure to take beforehand. Let us see what steps you need to take to prepare your building for an inspection with ease.

The Importance of Fire Escape Inspections

With every fire escape inspection contractor NYC serviceable area includes compliance of the weak and fragile cover of stairs, roofs, and anchorage zones. In the absence of a technician’s work, such examinations may identify expensive breaches or require renovations.

1. Engage One Fire Escape Inspection Contractor NYC

The first step is to hire a qualified and accomplished individual. This is to ensure your system is completely checked within the rules.

In a nutshell, consider the following:

    • Licenses and certificates from authorities in their areas
    • Good reviews and recommendations
    • Experience with the New York city fire regulatory requirements

2. Do an Inspection trails beforehand

Do walk through relevant equipment or areas etc. where possible.

Check for:

    • Corrosion of metal steps and joints
    • Staircases and welds with worn out bolts
    • Any lances of exits
    • Missing handrails or broken handrails

3. All Fire Escape Quarters have to be Spring Cleaned

Even though chairs can be put on escape ladders and slides, observe the following:

    • Ladders and stairs should clean as much as possible from objects
    • Windows, and doors Leant To except
  • Goals of Fire Escape Inspectors

4. Assurance of Structural Integrity

    • Stairs, platforms and connections have to be stable for all points.
    • Any metallic construction should not be very corroded or worn.

5. Installation as Well as Accessibility of it

    • The ladder must reach the ground.
    • The whole platform must be correctly supported and fixed to the wall.

6. Operational Stage and Safety of Unit

Inspectors make sure every component works properly in case of an emergency.

Most common causes of structural failure are:

  • Corroded Fasteners
  • Wood house with partially replaced wood

    • Non-functioning ladders

    Records and Application of the Law

7. Prepare All the Required Maintenance Records

Record all the previous checks/repair works in a logbook.

    • Any invoices submitted by the Fire Escape Inspection Contractor NYC for work done
    • Pictures taken of repaired areas and repaired after condition

8. On Time, Arrange Your Regular Fire Escapes Check-Up

According to a notice from NYC, every property owner is expected to conduct an annual fire escape inspection. Failing to do inspections, which are rescheduled or fronted can result in fees and may require litigation.

  • Favorable Steps to Ensure Performance of Inspection of Fire Escape’s Stairs
    • Confirm that all the hinged structures, ladders and others parts that move are alright before the Examination is commenced by the Contractor
    • Use fire proof paints to cover rust patches
    • All Nuts and Bolts Fitting should be Done Securely
Conclusion

The aim of the preparation of a Fire Escape Inspection NYC is more than just trying to pass a test. This process is rather the assurance of the lives of people and proper handling of the rules and regulations. Engage a good Fire Escape Inspection Contractor NYC and Plan Pre-Inspection to help in identifying the extent of deterioration, if present, and record previous repairs.