Multi-Standard Signal Converters or Isolators from Ucontrol Pty Ltd

K109UI Isolator / Converter

One of the most innovative devices in the family of signal converters/isolators from Ucontrol Pty Ltd Australia is the K109UI DC current/voltage to DC current/voltage isolator or converter. This device accepts mA/V signals and is able to convert it into mA/V standard signals quite easily and quickly. It is ideal for configuration for input up to 30V. Moreover, all parameters are also configurable through dip-switches. The power supply ranges from 19,2 to 30 VDC while power consumption is 500mW. The power supply connection is available on the terminals or a special connector called K-BUS that allows a distribution of the power supply to the modules via bus connector. There is also 3 way 1.500 VAC galvanic isolation along with accuracy of 0,1%. In case of any malfunction, the status indicators will show power supply error. It is designed to avoid any accidents in industrial environments.

The 6,2 x 93 x 102,5 mm K109UI isolator or converter can be 35 mm DIN rail mounted. This device also features a response time of 40 ms, operating temperature ranging from -20 to +65 degrees C and a single input and output channel number.

K121 Universal Loop Powered Converter

For all those looking for unique loop powered converter, Ucontrol Pty Ltd Australia brings the exquisite loop powered K121 universal converter. It comes with a universal input featuring J,K,R,S,T,B,E,N Thermocouple, PT100-500-1000 RTD, and -150…+150mV voltage. There is also potentiometer 500? and resistance of up to 1760?. The output of the K121 loop powered converter is 4..20 mA with 2-way 1,5 kVAC galvanic isolation. It is possible to easily configure the device with the help of standard EASY-LP software.

Z109UI Universal Analog Signal Converter

With a single channel number, the Z109UI Universal Analog Signal Converter features current bipolar selectable of up to 20 mA (resolution 1?A) or voltage from 100mV up to 20V. There is also single output channel number with current 0/4..20 mA or voltage 0/2..10 VDC. The response time is 35ms and power supply is 9..40 VDC, 19..28 VAC. The Z109UI – DC Current / Voltage Converter has a terminal housing for mounting on 35 mm DIN 46277. There is input and output signal setup DIP switch along with 11 bit resolution and 2,5 W power consumption. The dimension of the high quality Z109UI Universal Analog Signal Converter is 17,5 x 100 x 112 mm (w x h x d) while its weight is only 140 grams.

Z170REG Signal Splitter or Signal Duplicator

It is a DIN rail mount signal splitter or signal duplicator with power supply of 10-40VDC 18-28VAC. The Z170REG Signal Splitter has 1.5 kVAC, 4-way galvanic isolation with A/D resolution of 14 bits. This device has removable terminals and maximum 2W power consumption capability.

About the Author:

The writer is an expert in the field of Electronic with focus on Temperature Controller and Panel Meter etc..

Ucontrol Pty in Australia has introduced a pioneering product in the form of new generation, highly compact STR571 remote Modbus display.