What Is a Digital Panel Meter and What Kinds of Panel Meter You Can Expect From Ucontrol?

When you wish to monitor the different electrical parameters, you require the digital panel meter. You may use it for the three phases and even the singular phase. While making the panel meter, accuracy and quality are usually considered. You can get a range of panel meters from UControl Australia and the range encompass the singular phase voltmeter, ammeter and the three phase ammeter, volt current frequency, voltage current power factor. Most of the meters come with the RS-485 port for the communication. By using this, you may monitor your readings with the help of computer also.

The analogue input panel meter: The Pixsys STR550 Display

The digital indicator, Pixsys STR550 offers the 5 digits numeric display, a vertical orientation and programmable horizontal. It changes the screen colour on reaching the alarms. One is one of the most powerful panel meters from the entire family of digital panel meter offered by the UControl. You can include the universal input of 4-20mA 0-10V and the RTD power supply. The output here is 0-10V and 4-20mA.

Seneca S311A universal digital panel meter

It is amazing to watch that the S3 11A digital indicator is made available by the UControl in the -4 4 digit, -6 6 digit, -11 7 digit top, -8 8 digit. It has the 4 digit lower display version and magnificently comprises of the programmable thermocouple. The ohms input here is PT 100mV 4-20 mA 0-10ohms input. The 18V sensor power supply does all the magic. The isolated 4-20 ma features the Seneca S311A and has the pulse output standard of 0-10v. Featuring the IP65 48x96x96, bezel, the device has the accuracy reading of 0.05%. it has the optional SOPZ card that renders ModBUS RTU digital input and the relay of 2SPDT.

The Seneca S311AP penal meter

This digital panel meter accepts the 0-10mA or 4-20mA inputs. The supply is 12-24DC with the transmitter power. The bezel accuracy is 0.05% and the h*w*d is 48x96x40 bezel. Here the decimal point selection and the scaling are through the short menu with the use of keypad which you can protect via the password.

The S315 loop powered digital panel meter

It has the amazing digital LED power display that uses the 4-20mA loop. The maximum voltage drop can be 7V and the accuracy level is 0.05% scaling. There is a short menu which is used to conduct the decimal point selection and the scaling. Again the scaling and the decimal may be password protected.

The Seneca S3112A Digital Panel Meter

The 4 digit panel meter S3112D accepts the thermocouples which range between PT100 mV 4-20 and mA0-10vOHms. You are free to choose between the 12 and 42 Volt DC. One can even opt for the 19.29VAC, 24v DC and 80 to 240 VAC supply. The power supply is the 18 V transmitters. The pulse output standard range can be 4-20 ma and 0-10V. The h*w*d is 48x96x98 and the accuracy level is 0.05%.

About the Author:

The writer is an expert in the field of Electronic with focus on Signal Splitter and Temperature Controller etc..

Ucontrol Pty in Australia has introduced a pioneering product in the form of new generation, highly compact STR571 remote Modbus display.