Protect the stained surface and provide the acid stain concrete floors by fabcrete

Rating lines and acid discoloration a concrete porch or patio can definitely serve to dress it up and provide your outdoor space a far more finished look. Here’s how you can go about it.

Rating Lines in Concrete Piece

Decide on a scoring pattern for that concrete slab.

Layout the pattern about the concrete using a chalk collection.

Equip a circular saw having a diamond tipped masonry edge, and set the depth of cut about the saw to 1/4" heavy.

Score the lines within the concrete using a straight board or bit of plywood as a guide for that saw. Be sure to wear eye protection along with a dust mask when rating concrete.

Rinse the concrete slab having a garden hose to take away the dust.

Acid Stain concree Slab

Clean the concrete thoroughly having a scrub brush to get rid of any dirt or essential oil and rinse off any residue having a garden hose.

Cover any surrounding surfaces to avoid damage to unstained places.

Spray the slab lower lightly with water from the garden hose to lower the concrete.

Pour a good acid stain, such because Quikrete Etching Stain, right into a pump-up sprayer. Be certain to wear protective clothes and goggles, and follow all safety instructions about the container.

Apply the acid stain evenly towards the concrete slab, using a bit of plywood to keep the actual stain off unwanted places.

Allow the acid concrete stain to stay on the concrete immediately.

Once the stain has remained about the concrete for the recommended period of time, apply a mixture associated with baking soda and water having a scrub brush to neutralize the acid within the stain.

Use a wet-dry vacuum to get rid of any acid stain as well as baking soda residue.

Once the concrete has dried, apply a finish for example Quikrete Etching Stain Glossy Sealer to protect the stained surface and provide the acid stain concrete floors a finished look the task.

Crucial Concrete Acid Stain Functions:

• Affordable, unique ornamental concrete floor finish
• Indoor/outdoor DO-IT-YOURSELF chemically reactive stain
• two hundred sq. ft. per gallon (applying 2 coats for optimal coverage or perhaps a single saturating coat)
• Apply using just about all plastic garden sprayer or having a foam brush for scaled-down projects
• Add water to the full-strength acid stains with regard to additional color variation
• All acid stained surfaces should be sealed and if inside, waxed.
• For machined troweled areas, apply Hard Trowel Ground Prep before staining.

When you are thinking about services of how to acid stain concrete we can recommend http://www.fabcrete.com/concstain.html for thousands and good advice.

Our aim is to provide best information to all of our visitors. We feel very happy to serve you so visit to my article..