200w beam moving head lights

Introduction

The danger of high voltage electrical shock caution! minimum distance with flammable material

Lamps must be fixed installation, and to ensure that at any point of any flammable materials and lighting the surface for at least 20cm ( 8 ' ) of Distance. Beam need to locate the lens projected light projection object to maintain at least a distance of 12 m ( 39'4 ).

The level of protection for this moving head 5r equipment for Class I, so please connect the yellow / green wire grounded.Other lighting wires and the power cord of the device Do not mix then!Special attention

to the marked voltage of the power supply voltage and host! Ensure the effective voltage does not exceed the voltage range indicated on the rear window. You need to refer to the assessment.

Technical parameters

voltage: 100V to 240V ± 10 % / 50 ~~ 60Hz

• Ballast: electronic ballast
• Bulb: YODN MSD200 R5 ( optional 180W OSRAM SIRIUS HRI )
• Color temperature : 8000K Luminous Flux 7950lm (6m distance), light intensity 58760lx (20mdistance )
• Average life expectancy : 2000H
• Color wheel: 14 colors + white, positive and negative bi-directional

rotation

• Gobo wheel : a pattern Dribbling 17 fixed gobos + white, the pros and

cons of two-way rotation

• Prism: rotating eight prism, the pros and cons of bi-directional rotation

moving effect by moving head beam 5r, atomization function

• Atomizing effect: 0-100 % adjustable atomization beam angle
• Aperture: seven beam adjustment
• Focus: linear focus
• Dimmer / Shutter: 0-100 % linear dimmer light and two-piece strobe

governor (0.5-14 seconds)

• The level scan: 540 degrees, Resolution 8Bit/16Bit, automatic correction
• The scan vertical: 250 degrees, Resolution 8Bit/16Bit, auto-correction
• Beam angle : parallel beam angle : 0 - 3.8 ° Protection: IP20
• Control mode : International standard DMX512
• Channels : 20 Channels
• Other features: the mechanical closed light source power automatically halved
• Size: 345MM (arm width) X475MM (total high) X405 (bottom width) MM
• Double flight case size: 730MMX465MMX690MM
• Carton size: 460MMX385MMX550MM
• Net Weight: 17KG
• Patterned plate: a pattern dribbling 17 fixed gobos + white, the pros and cons of two-way rotation
• Color wheel: 14 colors + white, positive and negative bi-directional rotation.

Using the menu:

1. Boot display the main screen, press the black knob center once, the main menu appears on the display, enter the main menu setting items, the main Menu set of nine are:

• Exit
• a href="http://yourproequipment.com/cannon-co2-jet-gun.html">dmx co2 jet

address

• Parameter settings
• Options
• Display settings
• Manual control
• Test run
• Restore factory mode
• lamps restore

2. By rotating black knob confirm the displayed value, or activate the display function, or to enter the continuous menu. Clockwise menu The display items incrementing ( auto-repeat ), or pass on an item in the menu. Counterclockwise menu display decreasing significantly Shows ( automatic repeat ) or delivered to the menu on a project. Press to exit back to the main interface, each setting item has a return value,

Press Back to return to the previous menu.

a) Quit

b) DMX address :1 -512

c) parameter settings

i. return

ii control mode

1. Standard mode
2. Expansion mode
3. Compact Mode

iii. Lamps Model

d) option is set

i. return

ii. X Backward

1. YES
2. NO

iii. Y Backward

1. YES
2. NO

iv. XY exchange

1. YES
2. NO

v bulb control

1. ON
2. OFF

vi power-on lamp status

For more information, or to 200w beam moving head light contact us at http://yourproequipment.com/lighting/fog-haze-dry-ice-machines.html

Our aim is to provide best information to all of our visitors. We feel very happy to serve you so visit to my article..