Signal Isolator and Signal splitter solutions from Ucontrol Pty Ltd in Australia

When a flexible device is required to solve a signal conditioning application, the Z170 signal splitter & signal isolator from Ucontrol is the perfect solution. Ucontrol specialize in signal isolator, signal splitter, analogue to digital conversion, trip amplifiers and other signal conditioning products in addition to general instrumentation and automation control products. The Z series range of signal conditioner and signal isolator products leads the field in terms of application flexibility, ease of set up & functionality against cost ratio. These innovative DIN rail signal processing devices are manufactured in Italy by company with a reputation for high quality and reliable products.

The Z170 signal splitter several unique features including an isolated universal programmable input which can accept most common process signals such as thermocouple type K, J, R, S, T, U, B, RTD sensors PT1000, PT100, NI100, potentiometer & standard analogue linear inputs such as 4-20mA, 1-5 or 0-10V. For 4-20mA loop there is an on board 18VDC transmitter power supply, so the loop can be active or passive.

Full four port isolation exists between input, power supply and the two analogue outputs to 1.5kV.

The Z170 signal splitter has two analogue outputs which can be different signal types, choice of outputs are 0-5V, 1-5V, 0-10V, 0-20mA or 4-20mA.

The Z170 signal splitter has a very simple wizard based software utility aptly called EASY 2.8 which is also used for most other signal isolator products in the range. Easy 2.8 non standard signals and independently scaled output signal ranges to be configured and subsequently tested. There is no special interface cable required just a standard 3.5mm jack plug to RS232 or USB. Also, Easy 2.8 is a free download please contact us for details if you wish to experiment of trial prior to purchasing any products. If standard signal signals are used then a large selection is available by setting the on board dip switches and no PC is required for initial set up.

The power supply for Z170 signal splitter is a wide ranging 10-40VAC or DC so this versatile signal converter is also suitable for mobile or truck applications where 12VDC can be utilized.

The Z170 signal splitter is mounted to standard EN50022nDIN 35mm top hat Din rail, has a wide operating temperature of 0 to 60 degree centigrade so is suitable for the harshest industrial environments.

About the Author:

The writer is an expert in the field of Electronic with focus on Pid Controller and Temperature Controller etc..

Ucontrol Pty in Australia has introduced a pioneering product in the form of new generation, highly compact STR571 remote Modbus display.