Know More About Using Polished Concrete Floors For Homes

Polished concrete floors have mirror like finish with a glossy look that makes it a best choice for all homes. There are several options available in polished concrete flooring as you will be able to choose from several patterns, embedded aggregates, sizes, create saw cut patterns and colors of your choice. It is also possible to control the reflection of the concrete floors by choosing the best ones from several options of concrete polishing.

Quick and easy maintenance

Polished concrete floors are a great choice for commercial buildings as they are very easy and simple to maintain. You can maintain the concrete floors by just mopping to remove the dust and by making use of a floor cleaning product. Maintaining this type of flooring is similar to sanding wood. Making use of heavy duty polishing machineries that have fine grits with segments or disks impregnating diamond design will grind the surface gradually to get the preferred amount of shine and smooth to any degree.

What happens during polishing?

This process starts by using the coarse diamond segments which are bonded using metallic matrix. Such segments have coarse texture that can eliminate light coating, stains, minor pits and blemishes found in the floor to prepare for final smoothing. Based on the condition of the concrete floor, the rough grinding performed initially would be in 3 to 4 steps.

Then the concrete surface would be ground finely with the help of diamond abrasives that are embedded in resin or plastic matrix. The professionals will also make use of polishing disks with fine grits, which is often known as lapping the concrete to make the floor get the desired shine. To make the floor have a high shine finish, they might use a finer or grit of high capacity. The professionals who are experienced will have the ability to choose the next fine grit based on the surface of the floor and the volume of material which is being removed.

Role of the sealer

During the process of polishing, the internal impregnated sealer is used to sink the concrete and to blend well, making it very invisible. These floor hardeners will not only protect the concrete floor within inside and also densifies and hardens it. This prevents the need for topical coating that lowers the level of maintenance in a significant way. Few contractors would apply a phishing compound over the floor surface at the final polishing step for giving a bit of shine to the floor. Such compounds would help in cleaning all kinds of residue that is found on the surface through the process of polishing and leaves a finish that will resist dirt in the long run. They also seal the joints and the cracks in the flooring with the help of joint fillers, which are made from semi rigid and epoxy materials.

Polishing methods

It is easy to polish the concrete floors using two methods, namely dry or wet methods. Even though both methods are very effective, dry polishing method is the very common in the industry as it is much quicker, convenient and eco friendly. Wet polishing makes use of water for cooling the diamond abrasives to eliminate the grinding dust. This is because water would lower the frictions and is used as a lubricant as it improves the longevity of polishing abrasives. However, the owner of the premises should be prepared to deal with the slurry residue this method would leave and they can ask the professionals dealing with the floors to clean it and dispose it in an eco friendly manner.

You can also opt for the blend of dry polishing and wet polishing methods.

Xtreme Polishing Systems is a concrete construction products manufacturer, Surface Prep, Concrete Grinding, Polishing Diamonds, Grinders, Tooling Supplies, Buy Sprayable Sealer, Online Ginormous Genie, serving architects, engineers, and contractors.