Checklist for annual furnace repair and maintenance

Furnace maintenance is much more than changing the filter and flipping the thermostat to the desired level. It involves some things that are essential for running your furnace and avoid costly Furnace Repair near you

Find out more about what to expect from a regular furnace maintenance.

• The furnace repair company will first inspect the blower motor, housing, and the wheel.
• The task consists of additional steps depending upon the furnace model. It might need lubrication, and the repair guy will check the belt and replace it if it’s damaged.
• Next target is combustion blower. They check it for proper functioning and remove dust & lint from its surface, it present.
• If you have a gas furnace, they’ll check for the leaks in the second step to furnace maintenance.
• Next is lines and pan. They check whether there’s any obstruction in the operation of these, and if it’s, they remove it.
• Next, they test the evaporator coil and if it’s functioning properly.
• The burner is then cleaned and inspected for any malfunctioning.
• Then all the safety controls are checked one by one. Ignition is also tested and reset if required.
• Next, the furnace repair and maintenance service will focus on heat elements.
• They check the flue system and especially look for corrosion as it’s highly damaging to the system.
• Then all the electrical systems are tested. It includes everything like control box, connections, and wires.
• Then they perform the very obvious activity for furnace maintenance i.e. change the filters.
• They inspect the ductwork for leaks. Leaks make your system work harder and reduce its efficiency.
• If there are any unusual odors or weird sounds lurking around your house, they try to check if it’s being caused by the furnace. It usually happens because of issues in HVAC system, and they check the source to avoid chances of future damage.
• Then they run the entire system and review its functioning.
• Pressure settings are also checked like checking indoor & outdoor bulb pressure and other furnace system pressures.
• Apart from this, they also inspect the vent system and see if it’s operating.

These are the seventeen things that you can put on your checklist while ****yzing the work of furnace repair rockville and maintenance guy you hired. It’s a good idea to print this list and ensure everything is checked. Often, repair personnel tends to skip a step or two, and that’s what creates a major problem in your furnace in future. Act like an informed furnace owner and ask for what you pay for. Always hire a licensed technician for best results.

You can locate furnace repair silver spring services near you using this new marketplace. Try it! (Ref: samedaypros)

Before the internet, consumers had to depend on print advertising such as direct mail and phonebooks.