- Views: 8
- Report Article
- Articles
- Home & Garden
- Home Improvement
Houston Glass Repair- How to Do it?

by Duncan Flawer
Posted: Jan 19, 2014
Posted: Jan 19, 2014
Where are these glass doors used?
Sliding glass doors are very common at the entry to a backyard, deck, or patio area. In older homes, the sliding glass one is in need of some basic repairs. This article will address some of the most common problems afflicting older sliding glass doors, as well as some simple and low cost Houston glass repair one can do. Houses will often settle with age and become slightly out of square. This is a natural result of changes in the soil around your home's foundation. However, when a home settles, it sometimes results in not proper opening and closing, including sliding glass ones. If the sliding one no longer slides properly, it should be inspected to see if it has fallen out of square. Look at the top and bottom. If it's out of square, you may notice a slight crack at the top or bottom, especially when one is attempting to slide it back and forth.What is the solution to this?
The first and most simple solution to an out-of-square door is to adjust its rolling wheels. With most sliding doors, there are two roller wheel assemblies under it, allowing it to move back and forth easily in its track. To adjust these wheels, look for small holes in the face of the lower frame. Sometimes these holes will be plugged with small caps that are easily removed. One can insert a screwdriver in these holes to turn the adjustment screws, moving the wheels higher or lower, as needed.What if the solution does not work?
If this doesn't correct the problem, another option is to shim the door. This is slightly more work, because it involves removing the interior trim around it. Once the mouldings are removed, one can see that the patio door frame was installed and shimmed into the opening. It is also seen that it is no longer perfectly in square. You can take out or loosen the screws that secure the frame in place, and then re-square it, shimming it out as needed. Once the frame is square again, screw it back in place, and then you'll be ready to reattach the trim moulding again. Houston glass repair through re-squaring the door will not only make it operate more smoothly, but it will also make it more energy efficient, as this will eliminate small cracks that let in cold or hot air from outdoors.Author Resource: -
This article is written by Duncan Flawer. He has got into writing professionally and uploads regular informative articles. You can refer to the articles and the information put down by him and clears your doubts on http://www.glassreplacementhouston.com/services/.About the Author
Rate this Article
Leave a Comment
