Types of Pelican Case Inserts and Dividers!

If your older pelican case has lost its interior and is not able to fix the objects perfectly and protect them then using pelican foam inserts are the best option. There are various types of pelican foam available in the market such as custom solid layered foam which comes in two major forms such - Polyethylene or Polyurethane. Or you can use dividers and portions to create separate portions for different objects. You can use huge pelican case inserts to keep different equipment and tools for example camera, laptop, mobile, or guitar.

These foam dividers and partitions come in a huge variety of alternatives to meet almost every conceivable storage requirement such as: -

U-Pads or Foam Divider: If your storage requires encompassing small objects that have a tendency to roll around inside the pelican case, U-pad foam dividers provides individual compartments for each object with the added protection of connected bottom pad.

Foam-Lined Corr-Cartons - Business owners whose storage needs encompass sensitive products will never look at ridge paper boxes again. While prepared of the same inexpensive grooved cardboard, Corr-cartons are best to lined top, bottom and sides with urethane-foam to give superior cushioning to all the items at low price point.

Foam Divider with Channel - When all-around compartmental safety is necessary then channeled-foam-dividers may be your pelican case solution. Moreover, to bottom and side padding, they provide top edge safety.

Foam Divider with Cell Supports - Cell-supported foam dividers offer the same individual compartments with die-cut support in each cell of the case.

Foam Divider with Evolon - Evolon rolled edge cover is an add-on attribute of these portions and dividers.

Foam in Case - For protective advantage inside and out, pelican case inserts have a hard shell exterior. An egg crate or convoluted plastic case, these cases are lined top and bottom with urethane foam.

Foam Endcaps - For the repression of larger items that fill most of the storage cases’s space but not all of it, the foam endcaps inserts in the gaps, providing part support and 360-degree safety against breakage and damage.

Pad with Foam - This partitioning incorporates PP-Plastic-Pad with XLPE foam rails fastened to the interior.

Pad Set with Foam -Waterjet-cut XLPE foam is hot melt fastened into this case type.

Pad with Foam Rails - A plastic U-Pad molded, this foam divider has foam rails inside.

Plastic Tray with Foam Rails - This divider tray is lined with rails that provide cutout safety for parts of unique sizes.

PE Foam End-Caps –these end-caps are made of protective PE foam for pelican cases.

Tote with Divider - A rod locked divider offers the ultimate cushioning to the deep-pocketed plastic totes.

Stackable Tray with Foam - Laminated foam die-cuts partition this tray is available into individual compartments. Buy multiples to allow piled of your objects, thereby saving you space in your pelican case.

Cobra Foam Inserts offers replacement foam inserts, custom foam inserts, custom cut foam inserts & custom case foam inserts for protective cases and dry boxes.