300-209 Drill Kits

Question: 1

Which two are characteristics of GETVPN? (Choose two.)

A. The IP header of the encrypted packet is preserved

B. A key server is elected among all configured Group Members

C. Unique encryption keys are computed for each Group Member

D. The same key encryption and traffic encryption keys are distributed to all Group Members

Answer: A, D

Question: 2

A company has decided to migrate an existing IKEv1 VPN tunnel to IKEv2. Which two are valid configuration constructs on a Cisco IOS router? (Choose two.)

A. crypto ikev2 keyring keyring-name

peer peer1

address 209.165.201.1 255.255.255.255

pre-shared-key local key1

pre-shared-key remote key2

B. crypto ikev2 transform-set transform-set-name

esp-3des esp-md5-hmac

esp-aes esp-sha-hmac

C. crypto ikev2 map crypto-map-name

set crypto ikev2 tunnel-group tunnel-group-name

set crypto ikev2 transform-set transform-set-name

D. crypto ikev2 tunnel-group tunnel-group-name

match identity remote address 209.165.201.1

authentication local pre-share

authentication remote pre-share

E. crypto ikev2 profile profile-name

match identity remote address 209.165.201.1

authentication local pre-share

authentication remote pre-share

Answer: A, E

Question: 3

Which four activities does the Key Server perform in a GETVPN deployment? (Choose four.)

A. authenticates group members

B. manages security policy

C. creates group keys

D. distributes policy/keys

E. encrypts endpoint traffic

F. receives policy/keys

G. defines group members

Answer: A, B, C, D

Question: 4

Where is split-tunneling defined for remote access clients on an ASA?

A. Group-policy

B. Tunnel-group

C. Crypto-map

D. Web-VPN Portal

E. ISAKMP client

Answer: A

Question: 5

Which of the following could be used to configure remote access VPN Host-scan and pre-login policies?

A. ASDM

B. Connection-profile CLI command

C. Host-scan CLI command under the VPN group policy

D. Pre-login-check CLI command

Answer: A

Question: 6

In FlexVPN, what command can an administrator use to create a virtual template interface that can be configured and applied dynamically to create virtual access interfaces?

A. interface virtual-template number type template

B. interface virtual-template number type tunnel

C. interface template number type virtual

D. interface tunnel-template number

Answer: B

Here is a reference an explanation that can be included with this test.

http://www.cisco.com/en/US/docs/ios-xml/ios/sec_conn_ike2vpn/configuration/15-2mt/sec-flex-spoke.html#GUID-4A10927D-4C6A-4202-B01C-DA7E462F5D8A

Configuring the Virtual Tunnel Interface on FlexVPN Spoke

SUMMARY STEPS

1. enable
2. configure terminal
3. interface virtual-template number type tunnel
4. ip unnumbered tunnel number
5. ip nhrp network-id number
6. ip nhrp shortcut virtual-template-number
7. ip nhrp redirect [timeout seconds]
8. exit

Question: 7

In FlexVPN, what is the role of a NHRP resolution request?

A. It allows these entities to directly communicate without requiring traffic to use an intermediate hop

B. It dynamically assigns VPN users to a group

C. It blocks these entities from to directly communicating with each other

D. It makes sure that each VPN spoke directly communicates with the hub

Answer: A

Question: 8

What are three benefits of deploying a GET VPN? (Choose three.)

A. It provides highly scalable point-to-point topologies.

B. It allows replication of packets after encryption.

C. It is suited for enterprises running over a DMVPN network.

D. It preserves original source and destination IP address information.

E. It simplifies encryption management through use of group keying.

F. It supports non-IP protocols.

Answer: B, D, E

Question: 9

What is the default topology type for a GET VPN?

A. point-to-point

B. hub-and-spoke

C. full mesh

D. on-demand spoke-to-spoke

Answer: C

Question: 10

Which two GDOI encryption keys are used within a GET VPN network? (Choose two.)

A. key encryption key

B. group encryption key

C. user encryption key

D. traffic encryption key

Answer: A, D

Question: 11

What are the three primary components of a GET VPN network? (Choose three.)

A. Group Domain of Interpretation protocol

B. Simple Network Management Protocol

C. server load balancer

D. accounting server

E. group member

F. key server

Answer: A, E, F

Question: 12

Which two IKEv1 policy options must match on each peer when you configure an IPsec site-to-site VPN? (Choose two.)

A. priority number

B. hash algorithm

C. encryption algorithm

D. session lifetime

E. PRF algorithm

Answer: B, C

Question: 13

Which two parameters are configured within an IKEv2 proposal on an IOS router? (Choose two.)

A. authentication

B. encryption

C. integrity

D. lifetime

Answer: B, C

Question: 14

In a spoke-to-spoke DMVPN topology, which type of interface does a branch router require?

A. Virtual tunnel interface

B. Multipoint GRE interface

C. Point-to-point GRE interface

D. Loopback interface

Answer: B

Question: 15

Refer to the exhibit.

After the configuration is performed, which combination of devices can connect?

A. a device with an identity type of IPv4 address of 209.165.200.225 or 209.165.202.155 or a certificate with subject name of "cisco.com"

B. a device with an identity type of IPv4 address of both 209.165.200.225 and 209.165.202.155 or a certificate with subject name containing "cisco.com"

C. a device with an identity type of IPv4 address of both 209.165.200.225 and 209.165.202.155 and a certificate with subject name containing "cisco.com"

D. a device with an identity type of IPv4 address of 209.165.200.225 or 209.165.202.155 or a certificate with subject name containing "cisco.com"

Answer: D

Whether you are already an HP employee or want to further your career or you are just starting out with the desire for an IT career, you have found the right resources to help you succeed. With the HPE IT Business Conversations HPE2-E67 test, you wil