3 Tips To Maximize Your Air Conditioner’s Performance This Summer

Spring Hill, like the other places in Florida, has long and hot summers and short, cool winters. Although summer doesn’t officially arrive until June, you can feel temperatures soar from mid-May. Temperatures range from 47 degrees to 90 degrees Fahrenheit or more throughout the year. The average daily temperature remains over 86 degrees Fahrenheit during the hot season. Imagining life without an AC here is almost impossible. A well-maintained AC will not only keep your rooms cool but will also save your electricity bills and extend the lifespan of the cooling system. You can always contact a local air conditioning repair service provider to survive the Spring Hill summers. Here are three useful tips to maximize your system’s efficiency during the hot season:

1. Inspect the Unit’s Wiring

Switch off the AC’s power button before troubleshooting and maintenance. Take out the access panel of the condensing unit to check for any indications of overheating, burned or blackened wires, or melted insulation on the system’s wires. Make sure that all electrical connections are secure and tight. With an electricity test meter, you can have a look at the unit’s capacitors. Do not forget the contractor switch, and if you notice any signs of excessive pitting, replace the switch immediately. These are simple repair and maintenance tasks that you can do yourself without calling an AC technician unless you are not sure of replacing the unit’s wires and components.

2. Take Care of Your AC Filter

You can clean your AC filter provided you have a reusable one. The replacement of your unit’s filter is the most important maintenance task to consider during the summer months. Make sure you clean or replace the filter during the peak summer months, and once each during spring and fall. If you do not know where the filters are located, refer to the user’s manual or ask an AC technician. Air filters require periodic cleaning because dirt, dust, and allergens accumulated over time will reduce air circulation, affecting the unit’s cooling performance. The air circulating through the system may also be dirty, dusty, and even trigger symptoms related to asthma and allergy, making you or your family members ill.

3. Clean the AC Evaporator Coil

You will find the evaporator coil on the inside of the blower unit. Remove some of the bolts, screws, and foil duct tape before you start cleaning. Take a soft brush to get rid of the dust from the coil. Make sure that you spray it with a no-rinse coil cleaner that is available at any home improvement stores near you. Once you spray, it will foam up and dribble into the drain pan. Clean the pan with warm water, soap, and some amount of bleach. Next, pour a cup containing half of the bleach or water down the drain pan. To ensure that the drain is clean for a longer time, use a drain pan tablet and place it in the pan to prevent algae growth. Ensure that you use a bleach solution that flows easily so that you are not required to clean a blocked evaporator drain. Once you are through with the cleaning of the evaporator coil, replace the coil door and reseal it with a foil duct tape.

Although you can go the DIY way, we recommend opting for a professional service if you are not confident enough about your skills. Consider opting for a maintenance program to your AC in perfect condition. However, if it stops functioning or shows any signs of damage; contact a local air conditioning repair service in Spring Hill that can offer you a prompt service. Regular maintenance will also help you to save energy, money, and live comfortably during the hot summer months.