Easy Dent Fixes

When needing dent repair in Birmingham, you need to contact Revamp Motors. When you go with their superior service, you are going to get quality services that you deserve.

Dent repair is a method of removing minor dents from the body of a motor vehicle. It is not as easy as one may think in order to remove dents. This is why many people needing dent repair in Birmingham, choose to go with a professional, which is almost always the way to go. A wide range of damage can be repaired as long as the paint surface of your vehicle is still intact.

Most Common Practices

The most common practical use for dent repair in Birmingham is the repair of hail damage, door dings, minor creases, large dents and bodylines damage. If the dent looks simple, you can try it but if the dent seems to be something that is going to need a professional, your gut instinct is very well likely going to be true. The method can be utilized to prepare a damaged panel for repainting by minimizing the use of body filler. This technique is currently known as the push to paint method.

Factors Involved

There are a limited number of factors for a successful repair using painless dent repair that include the flexibility of the paint and the extent to which the metal has been stretched by the damage. This is going to depend upon the thickness of the metal, the flatness where the damage occurred and the intensity of the impact that your vehicle received. The shallower the dent that you have in your vehicle, the greater it is going to be that the paintless dent repair is going to be a suitable option for your vehicle dent repair in Birmingham. Dents that are several inches in diameter can be repaired by this method as long as the metal and paint are not stretched. Most experienced professionals are going to be able to repair a shallow large dent or crease to an acceptable level but very sharp dents and creases may not be suitable options for paintless dent repair.

Techniques

The most common techniques of dent repair Birmingham utilizesmetal rods and body picks in order to push out dents from the underside of the body panel. Glue and specially designed tabs may be used in order to pull out the dents from the outside of the panel. Fine tuning the dent repair is going to involve tapping down the repair in order to remove small high spots. Professional dent repair techs can blend high spots to match the texture of the paint called orange peel. Paintless dent repair requires a techto manipulate precise locations of metal to the correct height. Fluorescent lightingmay be used to visualize the deformation of the dent and to aid the tech in locating the tip of the tool being used to push the metal. Without a reflection from a light source to read the dent, the fine detail of the process may not be suitable to the tech.

Source: Click Here