Install Do it yourself crown molding To Give Any Room a Finished Look

Crown molding adds beauty and elegance to any room in your home. You can buy do-it-yourself crown molding online. This type of crown molding is made out of high-density polystyrene foam. It looks like real wood, and gives any room a finished look. The molding adheres to the wall with a special type of caulking product.

Make a plan by sketching your room on a sheet of paper. Measure the walls and total the measurements. Add 10 percent to your final estimate for possible waste and cuts. Mark a circle on all inside corners and a square on outside corners. Add the total of corners and write this information down. Visit an online company that specializes in selling this type of molding. Calculate the number of boxes you will need for the walls. Purchase special molding for both inside and outside corners. When you receive your molding, use a miter box to cut edges to fit your room. You may also use power tools if you desire. Place adhesive to each cut length and attach to wall.

Remove excess caulk with a damp cloth. Paint your new crown molding using the paint type of your choice. There are a variety of Do it yourself crown molding styles available to suit your taste. If you are going to paint the room, then do so before applying your crown molding. You can also buy molding at your local hardware store. This type of molding requires finishing nails. The difficult part about installing wood crown molding is the inside and outside corners.

There are a few Do it yourself crown molding installation tips to consider when installing at your home. Try using shorter lengths of molding rather than longer ones that require cutting. This will also make installation and transporting your lengths much easier. Practice cutting on scrap pieces of wood before making your real cuts. Hold the molding in place and mark the positioning on the wall before starting. If you are using finishing nails, you should blunt the ends of the nails to prevent splitting the wood.

Wood molding should have pre-drilled holes to prevent wood splitting. A nail gun will make installation go much faster. You can also paint the molding before installation to save you time. Install long pieces of molding so the shorter pieces can be used for mistake cuts. Locate wall studs to nail molding when it's possible. Contractor's adhesive will ensure your molding stays in place

Author of this article intends to make people understand how installation of Diy crown molding can give any room a finished look. Therefore, detailed procedure involved in installation of crown molding has been thoroughly explained in article.