Rely on Professionals for Pump Repair Service

From cooling tower to booster pump repair, you can rely on professionals who have been in the business for decades offering installation and repair services for many kinds of pumps. When you call for industrial pump repair services in Los Angeles, you mitigate the problems with your equipment and reduce down-time. When you visit http://coxindustrialservices.com/ you will find that round-the-clock service is available as needed, which is critical for certain types of companies or institutions.

Problems With a Booster Pump

Booster pumps are used to resolve low water pressure issues. Normally these machines are either piston or plunger-type compressors. The simplest design is a single-acting, single-stage booster comprising a cylinder with a piston inside. Problems can arise if air pockets form inside the system, when dirt or debris cause seal failure, or when the pump’s rotating component needs repair, to name a few.

The Cooling Tower Explained

A cooling tower is a dynamic system that extracts waste heat and transfers it to the atmosphere by cooling a water stream down to a lower temperature. The process is called evaporative because it permits a small amount of the water being cooled to evaporate into a moving air stream. The result is significant cooling to the remainder of the water stream. Air-conditioning units use cooled water provided by cooling towers, as do electric power generators. The smallest towers handle water streams of just a few gallons per minute. The largest cool hundreds of thousands of gallons per minute in large power plants.

Cooling Tower Issues

Among the specialized work provided by industrial pump repair services in Los Angeles is evaporative cooling tower repair. Thermal performance must be maintained, but certain issues can endanger system integrity. Towers are situated in the out of doors and are therefore open to the elements. Because of having a warm, wet environment, they invite habitation by birds and bugs. They are also prone to collecting wind-blown dirt and debris. Common cooling tower problems are corrosion and calcium buildup. They are also susceptible to earthquake damage. Inspectors will look for failed heat exchangers, piping issues or any damage to the tower itself.

Inspecting Chiller Problems

Chill water systems can be found in many large, commercial cooling applications and major HVAC air-conditioning systems. The chill water pump is an important component, but if the system is not working properly, one of the first things an inspector will take into consideration is the pump capacity and whether it is undersized in relation to the connected load. Other performance problems might point to a malfunctioning pressure sensor, a clogged system strainer or a short circuit in the piping system. If the pump is unable to meet maximum demand, the impeller may have to be replaced, or even the entire pump.

Your Up-Time is Critical

When you need industrial pump repair services in Los Angeles, chances are that you have a large and possibly complex chilled water system or cooling tower setup that needs to be kept in excellent working order at all times. Even if you only need repair for a sewage pump, jet pump or oil pump, up-time is critical, but help is at hand when you contact the pump repair professionals.

Kevin Smith is a writer and an avid reader. He writes about business, marketing, health, pets, or relationships etc.