Trap Surge from communication system to ground using surge protection Devices

A big and small industry is totally dependent on the communication system, as it enables to transfer message from one place to other.

Big communication system can be failed if surges enter to communication lines. Surges and transients change the characteristic of the fundamental function of signal. Noises are totally different from surges and voltage, noise is the small change in fundamental which can be reconstructed where as surges is the boom up of fundamental above the system capacity. This boom up is about twice or above the signal amplitude which is sufficient to shut down permanently.

We are having two types of communication surge protection device namely F-type surge protector (2 port, 3 port and 4 port) and BNC & N adaptor. These surge protectors are designed for TV, Satellite, direct to home and coaxial antenna etc. It is made of metal housing material and IP 20 degree of protection which enables connection protect from dust and shock. It is suitable designed for 24V and 48V DC to 180V, 30/60V DC respectively. Surges of amplitude 5KA to 10/20KA can easily be eliminate from the communication channels. It is true that suitability of surge protection device is totally proportional to the low response time. Our communication surge protection device is having response time below 10ns. Our surge protection device complies with IEC 61643-21 and EN 50173-1 standard.

F-type surge protector and BNC & N adaptor can also eliminate the lightning strike effect. The best part of these Communication surge protection system is that it do not have any impact on the input or output side of impedance loading (very minutely). Which means it absorb little energy without affecting the operation. Using surge protection devices system becomes more reliable and stable. It also increase the life of the system. We not only deal with Surge protection devices but also lightning protection system, Earthing-bonding solution, gel based cable jointing kit and many more.

Summary

It is a device that transfers all the surges and transients (flowing into transmission lines) to the ground. It is a device used in communication system for signal lines. It provides a safe and reliable operations at the output connected system.

Ashutosh Kumar is a Digital Marketer & Blogger. He likes to share interested posts related to electrical safety Products, Shopping products, technology, etc..