Get introduced to Fusion Splicer

A tool utilized for splicing two pieces of fiber cables together is known as a fusion splicer. It’s not tough to realize that the splicing of cables is frequently needed when the cable length is less than the actual necessity or when two types of cables should be joined together.

We have two ways of splicing the fiber optic cables, namely the fusion and the mechanical. A fiber cable includes a tube of special glass or plastic of a small diameter. The inner portion of the tube is given a mirror look to permit light to pass through without getting absorbed by the grass. Fiber cables are more effective than the copper ones for linking your computer to the internet, as some electrons are absorbed by copper. But in case of fiber optic cables, the photons can pass through the cable without losing any energy.

The Fusion splicer is the best splicer for the fiber cables. Its principle of working is to create an electric arc that is passed through the two pieces of optic cables that should be linked together. It joins the two parts of one single cable. The resultant joint, when made properly, hardly absorbs any light passing through it. Specific cable joints can only be created by using a fusion splicer.

Optical fibers are quite sensitive, and one should take extreme care to prevent them from getting damaged during the process of splicing. For that purpose, specifically designed tools such as OTDR and heat source is used for the termination and the splicing of fiber optics. Before commencing the process of fusion, the cable should be stripped on its outer protective coverings. This is a prerequisite for the procedure of splicing, and it will make sure that the splice doesn’t get polluted by the protective clothing.

The drawback of utilizing a fusion optic splicer is its big size and the high cost. Other than the splicer, you also need a precision cleaver, which again is quite costly. This is required for making sure that the end of the two cables to be joined is precisely parallel. In case, the ends are not perfectly parallel, you might lose some energy caused by the reflection of light.

The art of handling a fiber cable splicer is rather a skilled job and requires some experience. There is an associated stake of fire and might cause explosion due to the electric arc are produced for melting the requirements. It’s not such a big problem if you have to repair a covered outdoor cable, but it is quite a challenging task when you have to use the splicer in a tunnel or channel.

The mechanical splice doesn’t require that much expert handling, and is quite inexpensive also. You may also experience a connection loss that may be 5 or 10 times in respect to a fusion splicer, which doesn’t really matter under specific circumstances.

Author Info:-

Are you looking for Otdr, fusion splicer, fiber cable? Then you should visit the official website of tech Win China.

Bentley James works in a R&D division in the automotive industry. He says about how the testing equipments like Otdr and signal generator have been helpful in identifying.