Down Light Spring | Brake Parts Spring | Door Closer Spring

We are engrossed in providing a quality examined an array of Downlight Spring that is highly demanded in several industries. Under the guidance of diligent professionals, the offered springs are manufactured with the use of exceptional quality raw materials and contemporary techniques. As per the needs of the clients, these springs are offered in bulk at most economic costs. A downlighter is usually a pressed steel or cast aluminum lamp holder with a decorative fascia that is held into the ceiling using either spring clips or compression clips. Spring clips are exactly that. The springs have to be pushed to the vertical and the fitting inserted into the hole.We are a renowned firm in presenting a wide array of Springs For Slim Downlight to the admired customers. These products are developed employing handpicked quality raw material keeping in mind the global quality norms and standards. Employees work on urbane machines and advanced technology to provide optimal gratifications. Furthermore to this, presented products are extremely sturdy and has an even surface.

Features:

Durable finish

High compressive strength

Lightweight

Rigid construction

Sturdy

Seamless finish

How Many Downlights Do I Need?

This is the most often asked question we get. There is no hard and fast rule and each room may be different depending on its shape and the use to which it is being put. As a general guide, for ambient lighting in a rectangular room, mains and low voltage recessed downlights should be between 1.6m – 2m apart in every direction. Before deciding where to place the downlights it is important to ascertain where the ceiling joists run. Once this has been established it will become clear where they should be placed. Keep the first down light between 0.8m and 1m away from the wall. Any closer and the light will run straight down the wall and show up every imperfection, even on newly plastered walls.If you are going to use 3w LED GU10 light bulbs, then the calculation is slightly different. The first downlight still needs to be around 0.8m from the wall but the spacing needs to be reduced to 1.3m – 1.7m apart in every direction. This increase in light fittings offsets the reduction in light output from the LED lamps. For more information regarding spring custom manufactured parts, please call us at 9990044777 or e-mail us at kalyanisprings@gmail.com or visit www.kalyanisprings.com.

The every aspect of the manufacturing are supervised by the professional and skilled persons. All products of our company are fabricated by the quality of raw material procured from the reliable sources of the market.