Frameless Shower Door Sweep Replacement to Avoid Water Leaks

pFOkUS brings to you a huge variety of frameless shower door sweep which are made from the best and clearest polycarbonate material. These sweeps furnish a powerful grip and not just that; these can also be effortlessly pushed in the bottom railing of the shower door. pFOkUS sweeps are phenomenally stylish and unique and they fully serve their purpose without neglecting functionality. Once you bring home pFOkUS frameless shower door sweep, you need not worry about the shower door leak and enjoy your shower without the need of sweeping out water spills and leaks.

Once you start to notice the signs of damage and wearing out on your sweep, it is an indication that it has to be replaced. Otherwise it will permit water to trickle out of the door from bottom. Such water leaks may not look grave or worrisome in the beginning. As the water simply needs to be dried off the floor and you might feel, it’s the end of the problem. But over time, the floor surface will be extremely agonized from the water damage. Nevertheless, this situation can be averted if you introduce your shower with a high quality shower door sweep. Additionally, we will introduce you with the simple and easy procedure of replacing worn out and damaged shower door sweep with a good quality sweep.

Procedure to Replace a Frameless Shower Door Sweep

1. Notice the model of your frameless shower door sweep. Observe if you can easily pull out the old damaged sweep or would you have to open the entire shower door, through the hinges and then move further to eliminate the sweep.
2. All that you have to do is firmly hold the sweep and pull it outwards in order to remove it. You will hence be able to easily slide out the sweep without any trouble. Do not forget to check if the sweep is screwed to the shower door. In case, it is attached to the shower door with screws, unscrew it to proceed.
3. Now, considering the old sweep as the guide to fix the new one, get an estimate of its length and breadth. Thereby, purchase a frameless shower door sweep from pFOkUS online store. Do not worry about finding the correct size while ordering the new sweep. The new sweep can be a little bit longer than the old sweep.
4. As you receive the new shower door sweep from pFOkUS, compare it with the old sweep by holding both the sweeps together. Accordingly, cut it to the same length as the old sweep, if it exceeds in length. This can be done with the help of a strong scissor or sharp knife. Thereafter, using sand paper, you can smoothen out the edges of the sweep.
5. Once the correct size of the sweep is obtained, you can easily slide the sweep right into the slide without much effort. Make sure to use petroleum jelly or some soapy water to line the inside of the sweep track for much easier installation of the new slide.

Now that you have a brilliant solution for putting water leaks away, what are you waiting for? Contact us 404.551.3308 or simply reach us @ www.pfokus.com. Buy your new frameless shower door sweep today!

Bathroom grout sealer - It is important to strive hard to choose the exact grout color that suits your needs and requirements. This article will inform you about the many benefits of using Caponi- the best grout sealer.