Best Quality Glass Shower Door Drip Rail

Have you beennoticing water outside your framed shower door, soon after use? If yes, then it is a sign which cannot be ignored at any cost. Spills and leaks from the bottom of the shower can be due to gaps between the door and the floor, which can be fixed by a glass shower door drip rail. In case you have already installed a framed shower door drip rail and still experiencing leaks, then this can be the consequence of a worn out drip rail. Further, we will assist you on choosing the best drip rail and also on the step-by-step procedure of replacing it with ease.

Forged Aluminum Framed Shower Drip Rails-

pFOkUS’ high quality aluminum drip rails obstruct the path of escaping water through the bottom of the shower door enclosure. It has a fully functional built-in bottom seal to push out water and maintain a clean and dry surface. Besides, the addition of an endless gutter is a big advantage for you. pFOkUS’ drip rails are available in a variety of sizes, colors and lengths, that fit perfectly to any framed glass shower door.

Procedure for Shower Door Drip Rail Replacement-

• Before placing the order for a new

glass shower door drip rail, examine the width of the shower glass. The glass will either be 0.24, 0.32 or 0.40 inches thick. Accordingly, as per the thickness of your shower door, purchase a drip rail from pFOkUS online store.

• In order to remove the already existing damaged drip rail, analyze if it is attached in its position with adhesive, tape or screws. Proceed to remove the screws of the older drip rail with a screwdriver and if it consists of an adhesive, then scrap it off with a putty knife.
• Firmly grab the damaged framed shower door drip rail at one end and pull it open from the other end. Thereafter, compare the new drip rail and the old one to check if the lengths match. If the new drip rail is comparatively longer than the old one, then mark out the excess length with a marker pen, such that it equals the length of the older drip rail.
• Now cut the new drip rail as per your required length. pFOkUS’ framed shower door drip rail consist of vinyl sweeps which are cut on an angle at the bottom. Consider positioning the larger end towards the end of the door and the shorter end in the direction of the door hinge.
• You can conclude the drip rail replacement process by attaching the drip rail to the shower door. Gradually peel off the paper present on the waterproofing tape and do the needful. Remember to remove the black end cap located in the rail closet of your door hinge so that the water drains back into the shower.

Don’t compromise with shower door leaks. Because,a wet shower surface can lead to nasty falls. Buy quality glass shower drip rails @ goo.gl/RpFpv7or call us @ 404.551.3308.

Bathroom grout sealer - It is important to strive hard to choose the exact grout color that suits your needs and requirements. This article will inform you about the many benefits of using Caponi- the best grout sealer.