Advantages of Laser Cleaning System

Industrial cleaning, such as rust from old steel parts, may be a tedious process. In addition, removing paint and oil from metal parts can also be annoying. Just replacing the old part, rather than trying to give it a new life sometimes, more intelligent. However, this may cost a lot of money, but Laser Cleaning System has been touted as the ultimate solution.

All materials have ablation thresholds-

Laser ablation occurs when the material layer or a material layer deposited on a given surface is removed by a laser beam. This is actually the process of laser rust on steel and other materials, and the molecular bonds in the dust or rust layer are destroyed and ejected from the substrate. In less technical terms, you can imagine that the layer to be removed is simply evaporated by the laser beam.

The material can be removed in a highly selective manner with Laser Cleaning Machine

• p>

Let's continue by imagining. Imagine that there is a second higher wall behind the first wall, a ball is thrown, only enough energy to make it over the first wall, but the ball does not have enough energy to make it over the second wall. Then it will bounce from the second wall and fall between the two walls. Once again, no matter how many times you throw the ball, you will always get the same result. You will make it over the first wall, not the second wall.

Strong and short bursts mean faster removal-

You can think of laser ablation as stone carvings with hammers and chisels, trying to carve stones. You can use a little hammer and do a lot of clicks on your chisel. Or you can use a larger hammer to take advantage of more power, reducing the number of hits required and increasing the removal rate.

It is no consumption and environmental protection-

In addition, laser ablation is one of the safest solutions when rust or other chemical products are not used. Therefore, there is no chemical waste to take care. In addition, the use of laser machines, employees are not dangerous, because these machines are designed to meet safety standards.

Laser cleaning is the focus of various industrial processes-

Remove the burning rubber residue from the tire mold; give the old pipe a new life; the nuclear power plant purges the pipe, even the larger items, such as removing the paint from the rusty bridge and performing the surface treatment before welding, Laser Cleaning Machine to benefit from the project. Thus, the technique can be used in many different application areas; the only constraint is the ability to distinguish the ablation threshold between the material to be removed and the material to be protected.

Scantech Laser Pvt Ltd is well known nationally and internationally for its technological innovation in all areas of custom laser applications. Their professional team of workers does their work so efficiently.

Read above article useful information & knowledge for you.