Using Your Telescope To See Different Planets

When people buy telescopetheir main aim is to identify different planets and other heavenly bodies in the sky. Based upon the type and quality of the telescope you have, the clarity of your vision will depend. So how can you use your equipment to get the best look at the sky and find the planet of your choice? There are different steps in the process and knowing about them will help you in this regard besides troubleshooting the various related issues successfully.

• While it is possible to spot the planets, using any of the telescopes higher quality, and magnification naturally signifies a better view.
• When starting, your first step is to choose a plan that that you wish to view with your telescope. Check setting and rising times for your locality to know the different visible planets. Now you can make observations based on that.
• The exact location of the planet you want to view during observation is important. So make sure that you take your time to find out the position. Sky online almanacs are a good place to start as they consider different pointers including constellations, azimuth, and the planet altitude at any particular time.
• Now comes the time to find the location of the planet you want in the skies above. Many of these are visible planets such as Mercury, Saturn, Jupiter, Mars, and Venus. All you require are your eyes and the star chart to find them out with your telescope. Ideally, you should look for bright stars that do not twinkle in tandem with the surrounding ones with your Celestron telescopes.
• Once you spot such a star, it is time to find it out on your star chart. If you do not find it there, it is nothing but a planet.
• After you find such a non-star heavenly body, it is time to focus your telescope towards it. For this, you will require to use the Finder of your equipment. The Finder remains present on the outer side of telescope tube and it is in the form of a small telescope. With the help of the Finder, you'll be able to first aim and adjust using your main scope.
• So, what you do with the magnification of your telescope when finding the planet? Ideally, you should start with lower magnifications for planet spotting and then gradually go on to higher ones for detailing the same.
• Next part is the focusing of your Meade telescopes by using planetary disk edge. Correct focusing of telescope signifies that circular edge remains clear and sharp throughout.
• You need to adjust the telescope for compensating the apparent motion of the sky. As everybody knows, Earth rotates continuously so the position of the sky also appears as if shifting over time. When you use the telescope, this motion is going to shift the planet away from your view rather quickly. So, move the telescope with your hand or use drive motors attached to it for shifting position in tandem.

Those who want to know more about using telescopes for viewing different planets may visit the website https://www.optcorp.com/.

About The Author

Want to know where you buy cheap yet high-quality, branded telescopes on sale that’s worth a fantastic value for money? Paul Griffith is a passionate star gazer and an expert when it comes to telescopes. He highly recommends OptCorp.com as the perfect place to learn more about telescopes and buy the best at competitive prices.