Bid Adieu to Water Leaks with Frameless Shower Door Sweeps

If you already have a frameless shower door sweep but, are still dealing with water leaks then

the only reason will be the aging and damage of the already installed sweep. Once shower water

starts to pool on the floor, then in the long run you will have to deal with mold and mildew

growth on the surface of the shower. Nevertheless, you can help yourself from such a grave

situation with the use of a high quality shower door sweep. Read on, to know the simple

procedure of replacing worn out and damaged shower door sweep with a new sweep.

pFOkUS brings forth a marvelous range of frameless shower door sweeps molded from clear

polycarbonate material. These sweeps deliver a strong and power packed grip on the bottom of

the shower doors, without letting any water to escape out. pFOkUS sweeps can be comfortably

pushed onto the bottom of the shower door. The sweeps have a beautiful finish with a seamless

and unique look. It is a sweep which refrains from sacrificing functionality, in spite of its

engaging finish.

While choosing the right type of shower door sweep, you can choose rigid fin sweep, soft fin

sweep or even replaceable soft fin sweep. The angle and type of the fin is important as it plays a

great role in keeping the water where it should be.

How to Replace a Frameless Shower Door Sweep

1. Frameless shower doors consist of sweeps, so that they can prevent the shower water

from escaping through the bottom of the door. The sweep will either be fixed to the

shower door with the help of screws, adhesives, or will be a ‘push-on’ type.

2. Observe the sweep and check how it is fixed to the bottom of the shower door.

Accordingly, either you can simply pull out the old sweep or carefully open the shower

door thorough the hinges and then undo the sweep without damaging the door.

3. If the sweep is of the ‘push-on’ type then with little effort, you can simply pull out the old

sweep. Otherwise, if the sweep is attached with screw, then it is important to carefully

unscrew it. In the presence of adhesive, you have to gradually scrap off the adhesive with

a putty knife.

4. Thereafter, considering the old sweep as a comparative guide, calculate its dimensions

and place an order for a frameless shower door sweep on pFOkUS online store. If you

wish to opt for 32", 36" or 98" length of door sweep with a round soft fin of 7/16" then

place an order for frameless shower door sweep DS102. Once you receive the new

frameless shower door sweep, make sure that it’s length is same as the old one.

5. In case the new sweep is slightly longer than the old one, then cut it to the exact size with

a cutter knife and thereby, using sand paper smoothen out the edges of the sweep. Now,

use some soapy water or petroleum jelly to line the inside of the sweep track. This way,

the new sweep from pFOkUS will easily slide onto the bottom of the door.

To purchase an effective and fully functional frameless shower door sweep, contact us @

404.551.3308 or reach us @ www.pfokus.com.

Bathroom grout sealer - It is important to strive hard to choose the exact grout color that suits your needs and requirements. This article will inform you about the many benefits of using Caponi- the best grout sealer.