Directory Image
This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Privacy Policy.

Using Wire Hoist: A Pre-Operational Guide for The Users

Author: Mahi Sheth
by Mahi Sheth
Posted: Mar 19, 2021

Electric wire rope hoists have made their way across a vast array of industries. From monorail applications to solo hoists, these hoists cater to various purposes. However, it is important to know the right operational mechanism, when you use an electric wire rope hoist. Reach out to a reputed company to avail superior grades of hoists that come with enhanced longevity. The capacity of the hoists differs according to the purpose and nature of the project.

Here, you will come across detailed pre-operational guidelines for wire rope hoists.

Test the limits of the hoists

At the outset, you need to check out the upper and lower limits of the hoists. When you get a limiting device, it keeps the hoist from suffering damages. At times, the chain runs out of the hoist, or the hook block runs into it. When you test the limit of the electric wire rope hoist, these dangers are eliminated.

Generally, hoists are of two types. The first category comes with a limit switch, while the other has a slip clutch. In case you are using the latter, that incorporates a slip clutch, the test should not be done during the inspection stage during. You should conduct this test during periodic inspections.

If you are using a hoist that comes with a limit switch, the test should be done during the pre-operational inspection. During the testing of a two-speed hoist, the limit switch should be tested at both the speeds.

What to do before you test the powered hoist limits?

Before you test the limits of a hoist, certain precautions are to be taken. When you reach out to accomplished electric wire rope hoist suppliers, the professionals will brief you up about these guidelines.

  • The area under the crane or hoist should not have any obstruction. Check out for labours and objects under the host, or in its path.
  • Check out for loads on the hoist.
  • Be ready to stop the hoist at any given moment, by releasing the controller.

Checking the upper and lower limits

After you check out these aspects, you may proceed to test the upper and lower limits of the hoist.

  • Start running the hoist up, with no load on it.
  • In case you hear strange noises, inspect the hoist.
  • Before the hook block hits the hoist, you should be able to stop it, using the limit switch. In case you think it is going to fail, or it actually fails, make sure not to run into the bottom. It may cause damage to the hoist.

In case the limit switch cannot stop the hoist, remove it from your service. Now, you need to test the lower limit switch. The hoist hook needs to be lowered. You need to repeat the same steps that were necessary to test the upper limit. Check out for unusual sounds and the functionality of the switch. The electric wire rope has to be checked for defects.

When you approach the Electric wire rope Hoist, they will provide you with the necessary support to check the safety of these hoists.

About the Author

I am Mahi Sheth, an author of this article. We are a crane manufacturer and supplier in Ahmedabad, India

Rate this Article
Leave a Comment
Author Thumbnail
I Agree:
Comment 
Pictures
Author: Mahi Sheth

Mahi Sheth

Member since: Dec 13, 2017
Published articles: 2

Related Articles