Benefits of Waterjet Cutting for Stainless Steel & Aluminum

Waterjet cutting has been around since the 1950s. It was first used by Dr. Norman Franz, a forestry engineer looking for a better way to cut lumber from large trees. Since then, it has improved tremendously, and proven to be a highly effective method for cutting nearly any flat material, including stainless steel and aluminum.

A waterjet uses a high-pressure stream of water to cut or clean materials. The cutter is certainly often connected to a high-pressure water pump with the water being ejected from the nozzle, which after that cuts through the material with high-speed water. There may be additives in the form of abrasives that help with the process.

Here are some of the benefits of using waterjet cutting for stainless steel or aluminum sheet:

The Power of Waterjets

While at first you might not expect water to be such a powerful cutting tool, waterjets have the ability to cut through as much as an eight-inch stainless steel plate and 10 inches of aluminum sheet.

No Heat

Waterjet cutting is the desired method for materials that are sensitive to the high temperatures often generated when using other methods. Since there is usually no heat-affected zone (HAZ), this minimizes the effects of heat, permitting metal to be cut without altering or damaging the surface of the components.

High Precision

Waterjets are very precise cutting tools, as they are capable of attaining an accuracy of 0.005" (0.13 mm), and repeatability of 0.001" (0.03 mm). Not only is using the waterjet technique for your steel and aluminum precise, it also provides a burr-free finish. This eliminates the need for secondary surface area finishing in most cases, which in turn saves money. Also Read: Waterjet Cutting Toronto

Speed

Cutting projects that are done using a waterjet are extremely fast and efficient. There are several reasons for this:

1. Set-up times are short

2. The cutting process is certainly faster than various other methods

2. Re-cutting is certainly avoided due to precision of waterjets

Environmentally Sound

Waterjets are considered a green technology. For one, there is no hazardous waste produced in the procedure of cutting. Subsequently, since huge pieces of reusable scrap materials can be cut off, a waterjet prevents unnecessary waste materials that happen when using traditional cutting strategies.

There are even more environmental advantages to utilizing a waterjet for cutting your steel or aluminum. The waterjet uses very little water. It turns out to be about one half to one gallon of water used per minute. The amount depends on the cutting head orifice size.

Not to mention, the water that is used can be recycled using a closed-looped system. Wastewater is normally frequently clean enough to filter and dispose of through a drain.

Safer Work Environment

Waterjets eliminate airborne dust particles, smoke, fumes, and contaminants from cutting materials. This immensely improves the work environment and reduces problems arising from the machine operator's exposure.

Antech Technologies offers Laser Cutting, Laser Engraving Toronto and Waterjet Cutting Services in Canada. Our advanced Waterjet Cutting and Laser Cutting technologies can produce the most intricate designs on almost any material. To more about Glass Engraving Toronto services, Visit us today!

Hello, I am Emily Stone and I am Part-time writer. I hope you will like my articles. Thank you!