What to know about PTAC and PTAC air conditioning installation Manhattan

PTACs, packaged terminal air conditioners, are commercial grade, single, self-contained air conditioning units installed through the wall. Though they are usually installed for commercial purpose, PTACs are also used for residential purpose. The specialty of the compressor of PTAC is that it both heats and cools. While heating, the compressor uses the refrigerant to heat the coils as the air passes over the coils, the machine pushes the hot air into the room. On the other hand, while cooling, the mechanism is just reverse. The compressor, during cooling, uses the refrigerant to cool the coils to attract the humidity and heat, and then pushes them outside. Such AC units are larger than conventional air conditioner.

What are the advantages of PTAC unit?

PTAC machines are useful as they can heat and cool the room quite efficiently through a single entity. They’re durable. But since they are about 42" side, it needs to cut a large hole into the wall. The units can be set into an external sleeve with by means of an exterior grille. The units are usually pricier than conventional units. But since the machine can be used for both cooling and heating, homeowners don’t need to install separate units and thus they can save as much as 20 percent per year on their energy bills.

How to choose a PTAC unit?

Two important things that need to be considered while selecting a PTAC unit are plug type and BTUhs (British Thermal Units per Hour).

The plug type – Two types of parts are available – amperage and voltage. Generally, the higher the amperage the better the heating capacity is. Packaged terminal air conditioners may be plugged to a receptacle. It can also be connected permanently to the building’s electrical wiring. To hard wire the system, the users need to buy permanent connection kit also known as sub base kit. In case of replacement, it would be good to choose a system with the same plug type for determining proper amount of voltage and amperage. However, when it comes to installing a PTAC, it is always recommended to call a professional contractor for PTAC air conditioning installation Manhattan.

BTUhs – These are units to measure the heat extracted from a home by an air conditioner. The cooling and heating capacities are denoted in BTUhs. BTUhs may be calculated using an online calculator.

How to install a PTAC unit?

PTAC air conditioning system should be installed through a large hole in the wall. However, when it comes to installation or PTAC air conditioning repair Manhattan, homeowners should call a professional to execute the entire process of installation that includes installation the AC unit as well as the sleeve and grille.

Discussed above are some important aspects related to PTAC air conditioning system and its installation.

Thompson Clark is a freelance writer with years of experience writing on various topics. His recent article is a good read about the many reasons for falling in love with ductless air conditioning installation in Manhattan or Brooklyn.