5 Methods to Maximize Your Miter Saws

Miter saws are handy tools carpenters use to cut different angles with ease. It is easier using these saws than the normal handsaws since they enable you to set your saw as per the angle you want to cut your material thanks to their miter gauge. The four most popular cuts you can make with your miter say are crosscut, miter, bevelled and compound cuts. You only need to adjust some levers to the desired degree and proceed with the cut. Now, let’s see what you should do to your miter saw to ensure that it is always working perfectly.

Handles

You need a good grip when making these intricate cuts. Ensure that your saw has a handle with a good grip preferably rubber. You do not want the saw slipping off your fingers as you go about your work. It can not only mess up your cuts but can also be dangerous to you and those in your workshop.

Sharpen and Upgrade your Blade

The blade is one of the most important parts of your miter saw. Make sure that it is always sharp. You can do this by sharpening the blade frequently, otherwise, you won’t be able to make clean cuts. If you want to make crisp clean cuts, you can opt to have blades with different sets of teeth. Those with 24 to 40 teeth are useful for softwoods while those with 80 to 100 teeth are suitable for hardwoods. As a carpenter, it would be better if you have both. As every other product in the market, some miter saws are better than others. You can check a list of top miter saws by visiting the following link - https://allaboutsaws.com/best-miter-saw/.

Always Allow Your Blade to Come to a Complete Stop

Miter saws blades can cause serious damages to your material or cause a serious accident if not handled with care. When you are cutting your material, it is safe to allow the blade to come to a complete stop after you have made a cut before lifting. If you lift while it is still spinning, it can snag of the cutting of your working desk or scratch your material. Make sure also that the blade guard is working properly for security reasons. You do not want to lose your fingers while working.

Proper Support

It is important that you maximize your mitre saw’s support to have clean cuts. You’ll find that most of these tools are around 18 inches wide with a one or two feet extension to increase the stock support. However, you will be cutting some long pieces of materials which may require extra support. In order to prevent these longboards from flipping off your working table, you can create extra support for them.

Clamps

If you want good and clean cuts especially if you are replicating the cuts, ensure that you have a good and strong clamp. A strong clamp prevents your material from moving about and enables you to make multiple and similar cuts in a short period. You do not have to keep on a setting, measuring and marking your material, you simply mark one, clamp and make the cuts.

Sandeep Das is an active freelance writer. His other interests include organic SEO and growth hacking. He works closely with B2C and B2B businesses and has a background in marketing.