SAE 100 r1/1SN One Wire Braid Hydraulic Hose

2-wire braid high pressure hydraulic hoseis often found in mobile equipment including farm tractor, dump truck and in-plant hydraulic equipment. SAE 100R2AT hydraulic hose has three parts - excellent oil resistance Nitrile tube, good weather and petroleum products resistance Neoprene cover and double high-tensile wire braid reinforcement. It is ideal for outdoor working environments including offshore, forestry, construction and mining where high abrasion resistance is required. Petroleum- and water based hydraulic fluids with high pressure can pass through the inner tube smoothly and freely without producing excessive heat

ReinforcementInner tube should be compatible with the fluids it will carry and have some flexibility. Common materials of making tube are synthetic rubber, thermoplastics and PTFE. They are friendly to most petroleum- and water-based hydraulic fluids. If the tube reacts with the fluids, the hose will be prone to leakage or cause incidents. When you are not sure about the relationship between the tube and the media to be carried, consult us and we will come back to you soon.

Hose reinforcement is taken as a sheath protecting fragile tube. It is used to be multiple layers of braided textile, wire or spiral-wound wire. They can support different grades of pressures according to your applications. Commonly, textile reinforcement, whether single or double layers, is ideal for tight routing and low pressure system such as return and suction systems. Braid wire and spiral wire are usually for high working pressure. If the system has severe requirement of impulse fatigue, spiral wire reinforcement is the priority.

Outside Cover

Cover is the first barrier to guard the hose. It is usually made of abrasion and weather proof synthetic rubber to resist oils, chemicals, ozone and other adverse factors from outside environment.

Hydraulic rubber hoses are getting popular in conveying hydraulic fluids with pressure for their great flexibility, affordability and durability. General speaking, a hydraulic hose consists at least three parts - an inner tube which carries the fluid, a reinforcement supporting the tube and an abrasion and ozone resistant cover.

A hose doesn't fit all applications. It is necessary for you or your customer to know something about hose application and even the environments which will affect the hose durability. To save your time, we have summarized roughly three conditions of ordering the hydraulic hose tips.

First, the hose you required is standard, manufactured by SAE J517, EN 856, EN853 and so on, and you are sure the exact model number. You just advise us the number, and we will reply you soonest.

Second, this condition is a little complex. You are not sure which model is suitable for your application and don't know how to choose a hose. It doesn't matter. Just email us the exact application and several important data such as working temperature, max working pressure, media to be carried, hose inside diameter and environments, our professional sales will give the right choice.

Third, your required hose exceeds some specifications in the standard. Advise your data and we will arrange production as your requirement.

Professional manufacturer of hydraulic hoses and fittings. Stringent test before shipping. Considerable before- and after-sales service. Experienced engineer can make a detailed plan for your application. Our popular products