Quick Release Coupling: Features and its applications

Quick release couplings are fast and convenient to connect repeatedly and disconnect the fluid lines. The hose or tube of the fluid power system if connected and disconnected more frequently then chances are there these couplings perform rapidly by improving the productivity.

Even it looks simple in the concept, a lot of couplings are engineered precisely for specific kind of fluid application. Quick release couplings are used for a variety of industrial applications like oil refineries, chemical, steel mills etc. Therefore it is very difficult to choose the right coupling.

Still, there are certain features and its application you should know before buying it from quick release coupling Manufacturer in India:

Flow

The flow rate of system is the most important factor to look for. The designers must aim at minimizing the pressure drop for avoiding inefficiency in the system while considering couple size and internal valve.

Air inclusion

Air inclusion means air infiltration into the system when the coupling is connected. It is only applied to the coupling that closes at interfaces before valve gets opened.

Spillage

Spillage is not leakage means when little fluid comes out while disconnecting the coupling.

Pressure

Pressure gives impact on each component of the coupling, therefore, the improper application of pressure can lead to major problems.

Environment

Coupling does get affected by environmental factors and conditions under which they will be used. Couplings used outside must be weather resistant because when they come in contact with the unclean environment. Select quick release coupling suppliers in India who provide coupling without moving parts and get affected by any dirt than with movable sleeves.

Using frequency

On the basis of the frequency of usage quick connect coupling must be selected. For heavy-duty uses coupling without spring, poppet valves and O-ring seals rather than flat washers.

Location

The other thing to look for is couplings zero pressure type can be suitable for pipe only because one hand is used to open it. In most of the styles works on the coupling which is located at the end of the loose hose.

Size

The other feature you should look for its connection size. It can be determined using pipe fitting or hose to which this coupling is to be connected. The body size can be determined through required airflow. While flow rate cannot be that critical if coupling has the dusting device.

Application

Mostly they are used for connecting and disconnecting hoses. They are critical when machine productivity get increased. One of the common applications is while assembling at workstation because the worker has to switch quickly from impact wrench to the drill then riveter. With a quick acting coupling on half a tool and matching half of the airline changing tool can be done in seconds. If no coupling is used separate air lines will be required for each tool. A number of lines and tool can mess the workstation and slow the production down.

Quick release coupling diminishes bottlenecks by reducing the time that is required to test assembling each one. With one quick pull or push, the assembly will be ready to test.

Here we are discussing the different features of quick release couplings you should look for and its applications.

Buying a quick release coupling will be not that easy. So just check the features that you want according to its use and application. You can buy it from Ganesh Precision leading quick release coupling manufacturer in India.

Read above article useful information & knowledge for you.