Step By Step Guide For Building DIY Solar Kits

If you want to get in on the action and build your own basic solar panels, below is step by step guideline line on how you can do this:

First off, here are the basic things that you will need for this project:

• Basic woodworking tools, such as a saw, routine and screwdriver
• Silicone caulk, which is silicone based product and sealant that is used for make edges watertight.
• Glue for Wood
• For the wiring: wire strippers, wire cutters, soldering iron, and a solder
• Step 1: Acquire the DIY Solar Kits. The simplest way to do this is through purchasing online, because a lot of people are currently promoting solar cells there at a low priced cost. Ensure that the one you decide to buy has enough sections for the dimensions do it yourself solar cells that you are preparing on developing. Never ever buy anything noticeable as "grade B tissues," because there is a propensity for these to be already damaged or not as effective. Try to look for cells that are pre-tabbed, as this will be useful to you later on at the same time.
• Step 2: Developing your package. While you can decide to use any type of fabric for your screen package, the simpler to work with is definitely wood. Effectively structure your tissues before developing the structure. Preserve wood as you will need this later on for developing the substrate. Cut out the dimensions and adhesive it together, or use nails. Colour it any shade you wish, but ensure that you routine an opening for the cables from the sections to come out of.
• Step 3: Cabling the cells together for your do it yourself solar cells. Wiring 36 cells together can provide you with as much as 18 volts of power. This is where the pre-tabbed feature of the cells will come in useful to you. Because of this, all you actually need to do is to solder them together. If you did not get pre-tabbed cells, ensure that you solder them together before sticking them onto the case.
• Step 4: This is where the silicone caulk will come in. A dot in the very centre of each panel will be enough caulk because this will provide enough wiggle room for the wood to expand and shrink along with the weather it experiences. This is especially essential if you are intending to put your DIY Solar Kits somewhere that has no shade. Lay out your cells where you had originally planned them out to be. Glue each cell in place and allow it to properly dry before proceeding with the next step.
• Step 5: Put the

Complete Off Grid Solar Systems through the outlet that you had drilled previously on. Put some caulk onto the outlet so as to prevent wetness getting in through prolonged use. It may also be a good idea to put a plug on to end of the cable, but this connector will depend on what you intend to use the do it yourself solar cells for.

Source: DIY Solar Kits

Welcome to Fire Mountain Solar At Fire Mountain Solar We: Believe in always doing the right thing just because it’s right. Commit to doing everything we do in a thorough and responsible way.