Directory Image
This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Privacy Policy.

Why will You Choose Asphalt for Your Driveway?

Author: Juan Malec
by Juan Malec
Posted: Jun 09, 2018

Driveway plays an important role to enhance the value of your house. The appearance of the driveway is as important as the landscaping as well as exterior finish. Stained and cracked driveway can provide a lower impression of a house even if the lawn is well-maintained. So, it is very crucial that the right surface is installed that will last for a long time.

Even a few decades ago, gravel was used for preparing driveways and sidewalks. It was a cheap way to go as other materials would cost a person two or three months pay. Moreover, in the rainy days, water rose above the gravel and made the surface muddy. While a deeper gravel base was put down, the tires sink down.

Nowadays, there are several materials that you can use for driveway paving in Weymouth. And the preeminent among them is asphalt. With it, construction driveways took a big leap forward. An alternative to paving stones and concrete, asphalt is easier to install as well as accepts weather extremes better than other materials.

Hot mix asphalt: This type of surface is ideal for cold climate as it is more flexible than concrete and will hold its shape better than paving stones. Familiar as hot mix, the paving compound is made up of a mixture of stone and drenched sand with liquid asphalt cement. First, the gravel and the sand is heated and then it is mixed with the hot asphalt cement and after that, it is used. Therefore, the whole aggregate cools down at the same rate.

Chip seal: Another asphalt product that you can use for driveways in Mansfield is chip seal. It is very close to the hot mix aggregate except the cement is substituted with hot water. The water will evaporate when you will apply the mixture and thus made the driveway pad harder. Then you need to coat the surface of the pad with fine gravel that will later be pressed into the surface. It will make a harder driveway surface that reflects heat.

Base: Asphalt paving needs a solid base. This means you need to clean the surface properly so that the obstacles could not rise and cause imperfections in the surface. Large rocks, tree roots, and rotting wood have to be taken out and filled before the base is applied. Then gravel base is spread at the thickness about four to five inches

Slope and drainage: You need to determine the direction of water drainage at the time of planning the driveway. If your home is on a slight hill then the water will naturally drain away. But, if it is the below the level of the street then a drainage expert need to be called in to provide advice on keeping the water away from the building. You can get the assistance from the contractors. It can cause redoing the whole system around the home and thus, help to prevent problems like moister in the basement.

Driveway paving improves the appeal of your house. If you are in the search of the contractors for this, then do a little homework before you hire one. A reputable agency can help you by providing experienced contractors. They will offer you quality services that you are looking for. Install a driveway with the professionals.

About the Author

The author has been a professional in the sphere of Driveway Paving, Pavement Striping, Parking Lot Paving, Asphalt Paving Sealcoating. He has written several articles for delivering readers integral information on these topics.

Rate this Article
Leave a Comment
Author Thumbnail
I Agree:
Comment 
Pictures
Author: Juan Malec

Juan Malec

Member since: Jun 09, 2017
Published articles: 6

Related Articles