Manufacture and Uses of the Punch and Dies

One of the important industrial processes is punching. The punching dies find a use for making a variety of objects such as porcelain stoneware, ceramic tiles, and pharmaceutical tablets. Molds and dies are item specific meaning that you can use them for one specific purpose or item alone. Punching helps a variety of processes that use sheets of material.

Punching helps create holes or hollow space in a smooth base. The shearing force is created by a shear block or punch press that passes the work material into a die. The scrap slug gets deposited into the die after the process. Depending on the process, this scrap may be reused, discarded, or recycled. You can check the Punching Dies Manufacturers in Delhi to see what their offerings are in this section.

Pharmaceutical tablets are also made through the punching process. Punching is the cheapest method for making the tablets. Due to the repeatability of the process, the amount of energy and manipulation needed is minimal. There are no moving machinery involved only a punching arm and the die. This makes the process very efficient and fast. You can make a variety of tablets from the same mold.

Ayurvedic medicines and capsules also find some help from the process. The aluminum foil used for wrapping the tablets can be packaged using the punching process. This is helpful for the manufacturer because it packs the tablets quickly and the packing is good. It lasts normal tugging and pulling without distortion. This is very important as the medicines take some rough treatment at the hand of the patients as they take it to their homes.

You can get more details from the Tablet Punch Die Suppliers in Delhi. If you have a specific size of the mold in mind, you can check with the supplier whether they have it. If they do not, you can place your order for that size. They will give you the punch and die set soon as it is ready. If you use proper material for making the punch and die set, they will last for a long time. This will help you cut the overheads on the manufacturing process. If you choose a reputable manufacturer, then you can be sure of the quality and the life of the punch and die.

The punches can create multiple holes or pack multiple tablets at once. This reduces the labor needed and improves the work output. In the normal case, each strip will have 10 tablets and so the press will have this many indentations its surface. If you need two pills at one time, you can order that machine. It will produce two pills all the time. If you need four, check the supplier for the correct press.

The die block and the punch plate are made from rigid material as this takes the most punishment. You have a small pilot in place to keep the die in position for the next operation. If you need blanks, the blank die and the blank plate will come into use.

Kuldip Singh Rao is the founder and owner of Emmkay Industries in Delhi. We are dealing in a wide range ofPunches and Dies.