Directory Image
This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Privacy Policy.

High-Quality Liquid Flow Control Valve for Systematic Flow of Liquids

Author: Will Smith
by Will Smith
Posted: Jun 22, 2018

The function of a control valve is to regulate the liquids’ flow rate through pipelines in a system. And this achieved by putting a valve in the liquid flow’s path. It typically provides resistance to the liquid flow, where process control restrains the flow and resistance by a signal. This signal is actually borrowed from the sensors in a plant. We must note here that when a manufacturer supplies a control valve, he attaches it to an actuator which utilizes this control signal for activating the ultimate control component.

The various kinds of valves are classified by a connection between the flow rate through a valve and the position of a valve stem. 3 prime kinds of valves depending on the connection between the flow rate and stem position are Equal Percentage, Linear, and Quick Opening. The connection between the stem position at a stable pressure drop and the flow rate through a valve is known as the Inherent Valve features. The connection between the stem position for a valve and the flow through a valve installed in the procedure order at changing pressure drop is termed as Effective Valve features.

In order to restrain the liquid flow, a quality liquid flow control valve is the best option to opt for. This is the best system which makes sure that the flow should be regulated according to the criteria. The pre-set indications in the valves ensure that the guidelines for the user are readable. Depending on these guidelines, the functions in the process controlling take place. In many cases, it is recommended to choose particularized limits, something which is not harmful; with this, the controlling procedure will seamlessly run. If the particularized limit is set at a high rate or changed anyhow, then it might cause an alarming condition for which the user requires taking important and fast action. For being certain that the liquid level doesn’t cross the particularized limit, the valve is opened which will simply drain out the extra water. Instead of wasting on the liquid by setting its flow high, it’s greater to set its limit at a moderate level.

Basically, the control valves are classified into two parts – the body and the stem. The stem incorporates the plug, the valve stem, and the valve seat. And the body incorporates the housing characteristic that has the relations which bring in the supply line and the delivery line for joining in together. The transformation in the valve takes place for bringing about a move from resistance to flow and this is actually functioned by the stem. The plug and the stem shift in the upward direction and this cause elimination in the size of the opening place between the plug and the seat. Gradually this causes a transformation in the flow rate. And the direction in which the liquid flow shifts is pondered as the major importance. In case the direction is changed, the flow also will be turned causing issues in the valves.

About the Author

Proteusind.com able to offer flow measurement and instrumentation. These are designed and developed under the supervision of professionals following international standards.

Rate this Article
Leave a Comment
Author Thumbnail
I Agree:
Comment 
Pictures
Author: Will Smith

Will Smith

Member since: May 25, 2018
Published articles: 22

Related Articles