Reasons For Cracks In Concrete And Ways To Prevent Them

Concrete is a mixture of sand, cement, gravel, and water. It provides durability and strength to any structure. But, activities like drilling and nailing can lead to cracks in concrete structures because they make themfragile. Therefore, it is important to carry out such activities correctly to save the structure from cracks.

So, if you want to prevent cracks, here are some measures that you must adopt them.

Have a look at them!

Prevent Cracks During The Drilling Process

If you want to make a hole of the desired size in a correct way without destroying the drill bit, it is advised to use the hammer drills in place of the regular drill. When it comes to choosing a reliable drill bit, carbide-tipped drill bits are highly recommended. Such drill bits are sharp and do not go dull during the entire process.

To save the concrete from cracks, using the right technique of drilling the hole is very important. Place the drill perpendicular to the concrete structure and do not push it toward the surface. This will create cracks on the concrete. It is also advised that the concrete must be drilled up to a certain depth. Do not go deeper unnecessarily. This will make the concrete weak which will eventually make cracks in them.

If you think that you need a professional help to perform this task successfully then take the help of a reliable company like CA Drillers. Such companies provide ample services related to drilling and sawing.

Nailing The Concrete Without Causing Cracks In The Structure

To nail the concrete in a correct way, the professionals make the use of concrete nail guns. This nail gun uses the compressed air to perform the task in a smoother way. You do not have to be very cautious while nailing the concrete structure as it does not cause serious cracks.

Nailing does not take much time as a small amount of pressure is applied to the concrete. Due to this, no cracks are formed. But, that does not mean you take this process very casually.

At times, a masonry hammer is used in such a process along with the concrete nails. In other words, to force a nail into the concrete wall, the hammer is used. With continuous blows with the hammer, the cracks may appear on the wall.

Screwing The Concrete Properly

In order to put the screws in a concrete structure, drilling must be done first. After this, the anchor is placed in the hole with the help of the hammer. Be careful while drilling and do not make deep holes because you don’t really need them.

When the screw is placed finally, make sure that it isn't fixed very tightly. In case, the screw is too much tight, it will start creating pressure on the structure which will result in creating cracks. In addition to this, the increase in pressure can break the concrete which is surrounding the screws. Therefore, take precautions while performing this activity.

It is obvious that the screw has to be tight to prevent it from falling but make sure it is not too tight to break the concrete. Be calm and perform it with the cool mind to prevent cracks in the structure.

Other Reasons For Cracks In Concrete

There are many other reasons that cause cracks in the concrete. If the land under the house, shift a bit, it can result in cracks. But, these do not affect the strength of the structure on the whole.

The excess amount of water in the concrete mixture is bad for the structure. When the water from the mixture vaporizes, it turns into a thick and hard concrete slab. Here, the curing process causes thin cracks in the concrete. That is why use an accurate amount of water in the mixture to prevent it from cracking.

The poor sub-grade preparation is another cause. A quality sub-grade preparation is very important when it comes to providing a good base to the concrete. It must be even and smooth.

These small and impressive tips will surely prevent the cracks in concrete structures, which will eventually help in enhancing their durability.

Krysta Jackson a writer, who writes enriching posts.Apart from writing informative posts on latest technologies, she also writes largely on fashion, health,lifestyle, travel and other leading blogging platform.