How Two Shaft and Four Shaft Shredder Helps in Data Destruction?

Shredding of materials is a common way used in the recycling and destruction industries. You will find many kinds of the industrial shredder, and they vary in tune with the materials which can be used to shred, the material quantity which needs, the processing speed and finally the shred size.

Usually, there are the two types of shredders: two shaft and four shaft shredders. The speed and capacity of a sudden machine depend on the shredder size, the motor which is driving it and the infeed hopper.

Two shaft shredders are mainly designed to take the significant amount of debris and lower its size. They do not shred the materials to the tiny particle sizes as needed by data destruction regulations and laws. If a shredder machine is used only for the volume reduction, then the two shaft shredder will serve best. However, a shredder is used for destroying the data or materials but is vital to buy a four shaft shredder machine as it has the fantastic capacity, power, and it also generates tiny particles.

Two shaft shredders only tear the material and are limited in the particle size they can produce. Many materials require to shred into the strips of different lengths. Strip width depends on the width of the cutter.

The document shredding applications that need a high level of security uses a 5/8 inches wide strip. Many other applications use a cutter about 1 to 2 inches wide on the mid and small range systems, while the larger systems use about 2 to 6 inches cutters.

The particle length of a two-shaft shredder differs widely, depending on the material, and can range from several inches to a few feet.This size may not cater to the demands in some applications to generate a smaller and consistent particle size.

On the other hand, the four shaft shredders shred the materials into small sizes due to the piece of interchangeable screens that come in different sizes. Also, the shredded material must be low as compared to the holes in the screen to drop via the screen, or else the materials keep revolving in the shredder machine till it cuts smaller than the opening in the screen.

This process not just reduces the metal, but it also forces it via the cutters and screens. It also shrinks the materials, thus making it unrecoverable. The Four shaft shredder machine generates consistently sized pieces. It is because they are shred to the exact sizes that these types of shredders are best for the product destruction.

The low-speed four shaft shredders are high cost as compared to the two shaft ones. They also need more updated energy sources. A portable generator won't run this machine. This top-fed machine is suitable for mixed materials streams processing, including challenging materials like computer waste. Thus, all the destruction agencies use this shredder.

EcoStan® 4-shaft shredder machine offers destruction of any media or equipment with the assured compliance and can shred material to as small as about 2mm sizes. They have multiple screens to control the output size of the particle. The low-cost Chipper Shreddershred the pieces of metal, plastic, and any other waste.

EcoStan is one of the best briquette manufacturer in the world which manufacture Briquetting Machine, Four Shaft Shredder, Pellet Machine, Rotary Dryer, Flash Dryer, Dust Separator, Chipper Grinder, Hammer Grinder,