Seamless Steel Pipe Maintenance Problem

Pipes used in general households, such as tap water pipes, are basically made of seamless steel pipes. Although the performance is excellent, the nature of the workplace is very bad, and it can not be rusted. The daily maintenance methods and methods are What, today, let's learn together. Once it is rusted, its hardness and use advantages will slowly drop and drain. Choose a good place during installation, and wipe clean water after each use. Suitable for all kinds of detergent contact, more attention should be paid to timely flushing.

The long-term existence of water in the pipeline, long-term contact with detergent, will increase the speed of rust. The rust of the pipeline is because the environment is too humid, as long as we install the pipeline in the sunny place, the small use in the family is small Model steel pipe must be cleaned after a period of use. If there is more scale in the local water source, it will increase the rust reaction. If it is not cleaned for a long time, it will cause blockage and be cleaned regularly. Only then can we make the seamless steel pipe use more. Long time.

No matter what kind of material is made of pipes, it needs to be maintained. Although the seamless steel pipe has strong corrosion resistance and wear resistance, it will have certain influence on some strong acid or strong alkali materials. It is not difficult to find in life that some friends have a headache about how to remove rust, so it is necessary to maintain it.

Let's take a look at the footsteps of stable materials to understand how to maintain seamless steel pipes. The first thing that needs to be noticed by friends is the need to pay attention to the content of acid substances in the pickling process used in rust removal. It has been found through practice that the acid content is 18%. Although it can replace spiral submerged arc welded tubes in fluid transport, it can be placed in a humid environment, but in order to avoid the electrolyte adhering to the surface of the steel pipe, it is also necessary for friends to place it in a dry environment.

For the basic understanding of seamless steel pipes, I think many people know that after all, like the production and use of seamless steel pipes, it is really too popular. Of course, the maintenance in the later period is actually very important, especially after leaving the factory. The most important step is pickling. Since it is treated with chemical elements, it is necessary to pay attention to its safety in terms of safety protection. Especially for the staff, the necessary protective equipment needs to be worn, and the same environment should be carefully checked. Do not just care about one point, check it several times to see if the protective sling of the steel pipe is strong. Work can only be carried out after this series of inspections is in good condition.

Pickling, no doubt, the acid is the main raw material, but the acid content should not be too strong, can not exceed 20%. When the staff is operating the cleaning, the concentration of the acid, the tonnage of the steel pipe, the area, etc. must be clearly understood. The same is true when you understand this, you need the staff to master the cleaning time. Because during the cleaning, the cleaning time is determined according to the weight of the steel pipe. Can not be cleaned for a long time, the cleaning time is well grasped.

Also during the cleaning process, vibration is inevitable. Especially when the lower tube enters the acid tank, the steel tube will inevitably be inclined. At this time, it is necessary to pay special attention to avoid splashing of hydrochloric acid, thereby accidentally injuring the person next to it. When pickling, unrelated people are not close to the pickling project to avoid accidents. The treatment of wastewater cannot be discharged into the soil because it will contaminate the quality of the soil.

A worker from a steel pipe company, which is located in China.