High temperature vacuum furnace

high temperature vacuum furnaceFunctions: 1.Standard working temperature up to 2200°C (option up to 2400°C) 2.Standard vacuum: 5×10-3Pa 3.Furnace gas: Ar / N2 (and others on request) 4.Debinding / dewaxing as option 5.Thermal post combustion (TPC) as option 6.Fast cooling system, insulation opening, gas circulation as option 7.Special sizes and functions on request 8.Special furnaces for C and SiC 9.Heating and heat preservation can choose graphite heating + graphite felt heat preservation.High temperature vacuum furnace product features

• The furnace body and intelligent controller are designed separately, beautiful and generous, and the door is designed with side opening.? It adopts double-sided lining type heating elements to facilitate the replacement of the furnace wire. It adopts imported ultra-high temperature heating element, which has better oxidation resistance and greatly increases the service life.? Ceramic fiber insulation makes it greatly increase the heating rate and reduce the heat energy consumption. Compared with the traditional muffle furnace, the weight is reduced by 1/2, the heating rate is doubled, the energy is saved, and the service life is increased by 3.5 times. Good effect, low furnace surface temperature? Imported temperature control instrument, new digital display, digital set temperature, intelligent control output, can reduce visual and human error, greatly improve work efficiency.? With a variety of protection devices to improve safety and reliability? Independent control system for easy maintenance and replacement? There is a vent hole on the furnace body (gas protection can be added according to user requirements, exhaust air)? Other specifications can be customized according to user needs. Various non-standard tube furnaces, well furnaces, box furnacesPreparation: According to the needs of users, we can customize all kinds of special-shaped heating devices to heat the furnace!In addition to doing the experiment, do not stay in the high temperature furnace tube area.When the experiment is completed, if no one continues to use, please turn off the special gas, keep the N2 flow, and check if there is any other power supply that is off, not a small electric furnace for cooking acid or other, please turn it off.Wear gloves when handling HF. If you accidentally touch HF, please flush immediately, add 2% water with calcium gluconate, and rub the wound 15'.Please use the quartz glass products carefully to avoid rupture and cause serious cuts.Avoid inhaling various gases from the furnace or treatment tank.Potassium cyanide (KCN) cannot be mixed with acids because both can produce highly toxic KCN gas.If you find something that hinders safety, please notify the person (technician, etc.) immediately.Please save the amount of pure water.Broken wafers, filter paper, cotton swabs, do not fall into the bottom drain hole of the cleaning tank to avoid water stains on the floor due to poor drainage.The front end of the long and short putter should be facing up to avoid contamination when it is not used.When the wafer enters and exits the furnace, do not touch the furnace nozzle to avoid contamination of the furnace tube.Email: haoyue@haoyue-group.com

Prp is a topic that has been active in the beauty industry in recent years.