304 stainless steel round bar Supplers

The stainless steel round bars are very useful during industry applications in chemical, pharmaceutical, petrochemical, food processing, marine industries. The use of these rods also comes in handy when looking at construction purposes. A number of grades are available with the SS 304 round bar suppliers, one of which is the 304 stainless steel round bars.

To understand the basis of the 304 stainless steel round bar price, there are other factors to consider as well. One of this is the size of the round bars. The 304 stainless steel bars further extend to bright bars, hex bars, flat bars and square bars, all available in the 304 grade. The 304 stainless steel round bar sizes vary based on the outer diameter of the bars. The outer diameter ranges from 4mm to 500 mm. These helps in establishing the size of the round bars which can also be purchased at a specified size. Without cut, the standard length for these round bar types is between 1 to 6 meters.

No matter what types of bar you wish to purchase, the composition remains the same. You will note a percentage of.08 of a maximum carbon unit. The amount of Manganese is at about 2 percent. Following is the chart for complete composition of the 304 stainless steel round bars, 304 stainless steel hex bars, 304 stainless steel bright bars and 304 stainless steel flat bars.

Grade 304 Stainless steel bar (In percentage)

• C =.08 maximum
• Mn = 2
• Si =.75 maximum
• P =.040 maximum
• S =.030 maximum
• Cr = 18-20 maximum
• Ni = 8-11 maximum

The tensile strength which assures the performance of the round bars during tension is set at 515 MPa. The yield strength is present at about 205 MPa and the elongation extends to about 35 percent. Since these pipes are suitable for extreme temperatures they have a melting point of 1400 degree Celsius. The 304 stainless steel round bar tolerances depends on whether the stainless steel round bar is hot rolled or cold finished. When hot rolled the bars are passed through to reach a uniform thickness. In case of the cold finished round bars, the rolling process is done at a temperature which is almost near to the room temperature.

The composition properties and the outer diameter of the round bars help in measuring the weight. The SS 304 round bar price per kg is based on this weight of each round bar. When purchasing the stainless steel round bar for industrial application or the purpose of construction, you must be sure of the weight of each round bar. It will help you determine the price and bulk orders can be placed accordingly. While there are many variants available for these round bars, the weight of each bar differs. This further reflects on the per kg price of the bar that is placed for order.

stainless steel pipe suppliers | stainless steel tubes suppliers

We are inconel sheet suppliers and inconel tube suppliers