Arlo Camera Offline | Contact Us To Know, How To Reset Arlo Base Station?

Are you hunting for the best security camera for your home? Well, you must opt for Arlo security camera as it is recommended by experts who have not just tested it but are also using it in their home. Once you install it, it will start working fine and you will be able to monitor all the footages and live videos. While installing it, you may face several issues with its base station as it is difficult to understand these technical terms. One must know the specifications and complete procedure to install it. If your Arlo base station stops working, you must read the given guide on ‘How To Reset Arlo Base Station.

How does Arlo base station work?

The NETGEAR Arlo Base Station is primarily used to connect Arlo wire-free cameras to the internet via the router. It is further used to enhance its range and for a strong battery life. Talking about its feature, it is backed by USB backup, 7 days of free cloud recordings and Smart Siren.

Features of Arlo Base Station

Read its features and know how it is going to enhance security with much ease.

• It provides long-range connectivity as well as enhanced battery life
• Compatible with Arlo and Arlo Pro cameras
• Connects Arlo wire-free cameras to the internet via your home router
• Features USB backup, Smart Siren, and rolling 7 days of cloud recording

Follow the procedure to reset Arlo Base Station

By giving a reset to the Arlo base station, it will return to its default setting. Furthermore, it removes the serial number from your Arlo account. Follow the given procedure and apply the same:-

• Push the reset button and the sync button using a pin or straightened paperclip.
• Hold it for at least 10 seconds and let the LED light turns to blink amber.
• Once LED stops flashing amber, it will start rebooting.
• Open the Arlo app and tap the Arlo icon when the Power and Internet LEDs are both turn solid green.
• Tap on the ‘New System Setup’ button.
• Follow the given on-screen instructions.

Follow the aforementioned steps and reset Arlo base station within a short span of time. If you need any kind of support from Arlo officials, then reach out to the Arlo support team and get an instant response from most experienced Arlo technicians.

Fix Arlo Base Station Offline Issue

Check your Ethernet Cable: – Make sure that your Ethernet cable is perfectly connected to the back of your base station of the router or not? If it is not connected then connect it properly.

Put On/ Off Your Base Station: – Plug out the power adapter from the outlet and reconnect your power adapter to the outlet. Wait a few minutes and let it connect to the base station. If the power LED blinks to light solid green, it means that the base station is connected to the internet.

Check your Power Adapter: – You must check if the power adapter is securely connected or not.

Fix Arlo Offline Issue by Power Cycle Method

Apply this method and make your Arlo camera run properly.

• Turn off your Home Router.
• After that, turn off your Arlo base station and Arlo security camera.
• Now, wait for 5 minutes and turn on your home router for a few minutes
• Now, turn on your Arlo Camera Base Station and wait for 2 minutes more.
• Finally turn on Arlo Security Camera and insert the batteries if removed.
• Give it 5 minutes more and check if the issue has been fixed or it still persists. If it still persists then Reset Arlo base station.

I am a professional writer and a blogger. I would like to write blogs on technical terms, you can check my website by click here.