Cisco 2960X, best-selling Catalyst Ethernet switch

The Catalyst 2960 is the famous flagship switch which has drawn attention all over the world in the months. With Cisco 2960-s model has got the ability to do static routes which was a nicefeature. I used it in some deployments to do routing locally in 2960 and then add a default route towards WAN provider.That way I didn’t have to go through a slow CPE to route my local VLANs.

In order to meet the network users'requirements, Cisco introduced the next generation of its wildly successful Catalyst 2K switches with the new Catalyst 2960-X series.The new Catalyst 2960-X stackable Gigabit Ethernet switch builds on the foundation of the 3-year-old Catalyst 2960-S/SF. It is available in 24- or 48-port configurations, with 10G uplinks and a stacking capacity of 40G-80G.Uplinks are either 2x 10 Gbit SPF+ or 4x 1 Gbit SFP. The PoE models can support 370W or 740W of power.

Cisco has also improved the power consumption on the 2960-X series, claiming up to 80 percent power savings. Part of that savings comes from a new hibernation mode that can be set to conserve energy. The switch also supports Cisco's EnergyWise technology, which can be used to control energy usage on connected devices.

What's the difference between Cisco 2960X and 2960S? Here are some notable differences between 2960-X and -XR compared to 2960-S.

Dual core CPU @ 600 MHz. 2960-S has single core2960-XR has support for dual power supplies256 MB of flash for -XR, 128 MB for -X. The S model has 64 MB512 MB of DRAM compared to 256 for 2960-S1k active VLANs compared to 255 for 2960-S48 Etherchannel groups for -XR, 24 for -X and 6 for -S4 MB of egress buffers instead of 2 MB4 SPAN sessions instead of 232k MACs for -XR, 16k for -X and 8k for -S24k unicast routes for -XR, 16 static routes for -X and -S

The newer models also support Netflow lite, hibernation mode and EEE.

Note: If you want to know more aboutWs-C2960X-24Ts -L andWs-C2960X-48Ts-L,you can follow here.

Key Performance:2960-X Lan Lite has 100 Gbps of switching bandwidth and 64 active VLANS. 2960-X Lan Base has 216 Gbps of switching bandwidth and 1023 active VLANs. The same holds true for 2960-XR with IP Lite feature set. The 2960-S had a maximum of 255 VLANs and 176 Gbps switching bandwidth. Depending on model the 2960-X tops out at 130.9 Mpps compared to 101.2 for 2960-S.

Note: the switches also have added support for IPv6.

Now,if you interest in Cisco 2960X series switches and don't know how to buy it with reliable quality and competitive Cisco price,don't know,Router-Switch is such an best website which is the World's Leading Cisco Supplier.In order to help users to solve their networking problem with less money.They released offer huge disscount for C2960X series switches.

Dual core CPU @ 600 MHz. 2960-S has single core2960-XR has support for dual power supplies256 MB of flash for -XR, 128 MB for -X. The S model has 64 MB512 MB of DRAM compared to 256 for 2960-S1k active VLANs compared to 255 for 2960-S48 Etherchannel groups for -XR, 24 for -X and 6 for -S4 MB of egress buffers instead of 2 MB4 SPAN sessions instead of 232k MACs for -XR, 16k for -X and 8k for -S24k unicast routes for -XR, 16 static routes for -X and -S

linknewnet.com is the world's Leading Cisco Supplier which provides full series of network equipmen.