Using an Air Compressor for The First Time- A Complete Guideline

Using air compressor for the first time might be challenging for many. There are several issues that you need to know to set up an air compressor before running. Apart from that you should be well informed about some terminology related to air compressor like PSI, Cfm etc. Go through this article, you will have a complete guideline on running an air compressor for the first time.

Set Up the Air Compressor

If the compressor is not free from oil, then check out the pump oil level. Usually, the large compressors are oil-filled. Find out the dipstick which is close to the bottom of the compressor’s ends. Pull out the dipstick and check the oil level.

If you don’t know the type of the compressor, then check the manual. Generally, the small compressors are oil-free and you won’t find any dipstick. But you should acquire a clear concept about the machine type. This will help you to operate the air compressor more comfortably.

Connect the hose to the regulator valve. Place your compressor on flat ground and find the regulator valve. Plug the power tool into the hose. Carry the hose in one hand and a power tool in another hand. Connect the compressor into a grounded 3-Prong outlet. Turn off the power switch of the compressor before connecting. Avoid using extension cords because these cords are responsible for overheating.

Wear Safety Kits

Use polycarbonate safety goggles which will protect your eyes. Wear good shoes or boots which will protect your toes from dropped tools. Wear all the safety gears before running the compressor. Wear ear muffs because some tools will be pretty noisy. To check the safety valve, pull it on. Find out the copper-colored plug which is close to the hose line.

Warm Upthe Compressor

If you release the valve, then you will listen to the hiss of escaping air. Hearing the sound means the valve works accurately. You are ready for next step to use your air compressor.

Turn on the air compressor and wait for the tank when it has been pressurized. People make mistake in this stage. They try to use the machine immediately that cause harm to your machine.

Check out the tool and know how much pressure it actually wants. You will see printed details on the tool. Run the power tool only when you know that there is air in the tank. If the air is in the hose, then use the tool.

Controlling the Compressor

Check the air tank drain valve. Open the valve and allow it for condensation. Drain the condensation after every use. This will keep your machine efficient. Also, ensure long-lasting performance from it.

To drain the pressure, turn off the compressor. Store the air compressor by removing the hose. Unplug the device from the wall. You should read the user manual carefully before you start using it.

Keep this air compressor in a dry place. Because it will help you keep the air compressor active for a long time. People always make mistake when they store it. You must clean your air compressor properly before you store it.

If your compressor is oil-filled, please change the oil every year to get the maximum benefit. Clean and fresh oil is always important for better functionality. An air compressor is a machine. The same rule applies to it as well. To catch the old oil, carry a container on hand. To add new compressor oil, use a funnel.

Please check out the manual. You will have a very clear idea about changing the oil.

Final Verdict:

Though using the air compressor is not a difficult task, but at the beginning, it may seem really difficult. After using for some moments, it will be easy for you. Basically, an air compressor machine is easy to control and operate. Buying an air compressor is beneficial for you because it will make your life easier by doing some great jobs no matter what project you utilize it for.

Source: Air Compressor Agency

I am Rasel Ahmed. I am come from Dhaka Bangladesh. I am a Digital Marketer. I am working in this field last three years Five months.