How to Fix the Issue of Auto Brightness for iPhone 8, 8Plus, and X?

The auto brightness options in iPhone 8, 8 Plus and X doesn’t work after replacement of a new screen, purchased from iPhone LCD screen wholesale suppliers because the screen and phone Sensor Flex Cable are associated with the motherboard in iPhone iOS 11. You can fix this problem with the iOS 12 Beta 2.

A machine called "iPhone 8 ALS EEPROM Programmer" can read data of new screen IC as well as write to aftermarket screen. Afterward, the data transfer, an aftermarket screen ordered from iPhone LCD screen wholesale USA could match with the motherboard, and then the issue of auto brightness isn’t working will get fixed. Let’s go through the procedure to fix iPhone X/8 ALS (Ambient Light Sensor) stopped issue after the screen replacement.

Fix the auto brightness problem of iPhone X after-screen gets replaced.

1. Test the function Ambient Light Sensor of iPhone X’s original screen. The Screen auto brightness function should work fine.
2. Move a sensor flex cable from original to aftermarket including China-made and OEM screen.
3. Test iPhone X’s aftermarket screen ALS function. The Screen auto brightness function won’t work.

Transfer iPhone X’s main screen IC data to Aftermarket screen:

lStart the iPhone 8 Eeprom Programmer using a USB data cable.

lAttach iPhone X’s original screen towards the left.

lConnect iPhone X’s aftermarket screen towards the right.

lPress the "PROG" button and then press the "Read" option to initiate reading screen data and it will take around 3 seconds. (In case, the reading fails, check if its screen connector is secured)

lPress "Write" for transferring data to aftermarket screen and it will take around 3 seconds.

lThen disconnect this screen connector.

1. Test the ALS function of iPhone X aftermarket screen after the data transfer. The Screen auto brightness function is working normally.
2. Then move the flex cable of iPhone X sensor from the aftermarket screen to original screen purchased from iPhone LCD screen wholesale China.
3. Test the ALS function of iPhone X original screen and Screen auto brightness function will work fine.
4. Test the ALS function of iPhone 8 original screen and screen auto brightness function is working fine.
5. Then move the sensor flex cable from original to aftermarket including OEM and China-Made screen.
6. Test the ALS function of iPhone 8 aftermarket screen and screen auto brightness function is not working.

lTransfer data of iPhone 8 screen IC to aftermarket screen:

lConnect iPhone 8’s original screen towards the left.

lConnect iPhone 8’s aftermarket screen towards the right.

lPress "Read" and start reading screen data as it takes around 3 seconds.

lPress "Write" for transferring data to aftermarket screen and it takes around 3 seconds.

lThen disconnect screen connector.

1. Test the ALS function of iPhone 8 aftermarket screen after data transfer and Screen auto brightness function will work normally.
2. Move the sensor flex cable of iPhone 8 from the aftermarket screen to original screen.
3. Test the ALS function of iPhone 8 original screen and Screen auto brightness function is working fine.

CellPhoneSpares is the wholesale online store, where you can conveniently purchase spare parts & accessories for cell phones, laptops, and game consoles.