Machine Vision Inspection Scheme for O-ring

The O-ring detection scheme of machine vision scheme:

1. Contents and requirements of testing

Measure workpiece area:

Size and Appearance Testing of Samples with Inner Diameter of 10mm*Thickness of 2mm

Content of detection:

1. bottom appearance
2. side height
3. top appearance
4. Maximum diameter, minimum diameter, burr

Note: The above detection items need to be clearly visible under the image to detect.

Detection efficiency: 180-250 pieces per minute (according to sample feeding speed).

Division of work: Subdivide the detection steps according to the detection content.

• visual inspection machine manufacturer
• a href="https://www.sipotek.net/">automated optical inspection machine manufacturers

• p>

II. Equipment Composition and Major Institutions

Overall Composition: Dimension: 900*800*1850 mm

Model: SP_302C

1. SPOTECK Visual Detection Software
2. industrial computer
3. display 19 inches
4. Industrial cameras: 4 sets, respectively, bottom positive light, side back light, top positive light, top back light.
5. Industrial lens: 2 FA industrial lens, 2 telecentric lens
6. professional glass tray
7. solenoid valve
8. reducer
9. vibration cabinet
10. Feeding equipment (Vibrating disc, Direct Vibration, Controller).

free shipping coupon code: freeshipping on any order from sipotek.net

For more information visit here…. https://www.sipotek.net/

II.1: 3-D Stereogram of Equipment Appearance

3:1 Bottom Detection Method

Bottom detection effect original picture:

3:1 Bottom Detection Method

Bottom Test Fine Product Analysis Chart: OK

3:1 Bottom Detection Method

Bottom Detection Fracture Failure Analysis Diagram:NG

3:1 Bottom Detection Method

Bottom defect analysis chart:NG

3:2 Side Detection Method

The original image of side detection effect:

3:2 Side Detection Method

Analysis of the effect of side detection products: OK

3:3 Top Detection Method

Top detection effect original picture:

3:3 Top Detection Method

Top test product analysis chart: OK

3:3 Top Detection Method

Negative Analysis Chart of Top Detection Lack of Material:NG

3:3 Top Detection Method

Top Detection Fracture Analysis Diagram: NG

3:3 Top Detection Method

Top Detection Fracture Analysis Diagram: NG

3:4 Top Backlight Detection Method

Top Backlight Test Fine Product Analysis Chart: OK

3:4 Top Backlight Detection Method

Top Detected Edge Bad Analysis Chart:NG

3:4 Top Backlight Detection Method

Top Detected Edge Bad Analysis Chart:NG

IV. System Installation Requirements:

Inspection space for equipment placement: Separately installing SP visual inspection system at the pipeline side, it is necessary to ensure that there is enough space to install the equipment.

Ambient temperature: 0-50 degrees Celsius;

Air humidity: below 90% RH;

Electronic jamming: Provide equipment with less electronic jamming.

Power supply: 220V, 50Hz AC, less than 1KVA power consumption

Overall Composition: Dimension: 900*800*1850 mm

Model: SP_302C

1. SPOTECK Visual Detection Software
2. industrial computer
3. display 19 inches
4. Industrial cameras: 4 sets, respectively, bottom positive light, side back light, top positive light, top back light.
5. Industrial lens: 2 FA industrial lens, 2 telecentric lens
6. professional glass tray
7. solenoid valve
8. reducer
9. vibration cabinet
10. Feeding equipment (Vibrating disc, Direct Vibration, Controller).

Visual inspection machine manufacturer https://www.sipotek.net/ Sipotek borns in 2002 to meet the demands of the industrial market in the field of control and vision inspection.